TBI Parts and Moates programming pieces for Sale

[Opas69]

Tbi parts from 1988 GMC 5.7 Van. Throttle Body, Distributer, Sensors(no knock), 7747 ecm, intake manifold with egr block off plate(hot tanked and clear coated).Other parts-7427 ecm, 8625 ecm and 4 drac modules.Moates parts-Burn 2 Chip Programmer, ALDU1 & CABL1, two S2 28 pin zif, and two C2 SST 27SF512 Chips. PICTURES ADDED

[rsicard]

Need more close up photos especially, 7427 ECM and its BCM, ECM connectors with pigtails and DRAC modules. Remainder of stuff is worth very little.

[Opas69]

No BCM. Pictures added above.

[Byron454]

what are you thinking you need to get for the pieces, as part or the whole lot?

[Opas69]

I decided to use the bulk of the parts on my 69 Camaro I am building. The only parts I would get rid of would be the 8625 ecm and a drac module. Where are you located? Thanks, Steve

[Byron454]

Hey no problem just thought if you were getting rid of it all, might be able to make a deal just to make sure it didn't get scrapped, but if you have a use for that's what's important Let everyone know if plans change.

[Mickey]

Not sure if I read the posts correctly, so I'll ask. Are you still selling the Burn-2, 256EE's and the ZIFs? Do you do PayPal? regards, Mick

[Opas69]

Sorry for the confusion. I decided to use all the Moates parts and most of the other parts. I would get rid of the 8625 ecm and a drac module or two. Thanks, Steve

[rsicard]

Sorry for the confusion. I decided to use all the Moates parts and most of the other parts. I would get rid of the 8625 ecm and a drac module or two. Thanks, SteveInterested in the DRAC modules. How much for all of them? Do you do PayPal? Please advise. Thanks.

[Opas69]

Let me finish my build so I make sure I have a good one. If you are still in need at that time I would give you one.