View Full Version : Socketed GM LT1 16188051 ECM w/ Programmer
EDZIP
06-29-2016, 02:40 AM
Not Mine..spotted it on eBay (it's in Canada)
http://www.ebay.com/itm/Socketed-GM-LT1-8051-ECM-w-Programmer-/252439692821?hash=item3ac6940615:g:YIIAAOSwM4xXcFI 2&vxp=mtr
steveo
06-29-2016, 06:47 AM
its mine
EDZIP
07-02-2016, 03:47 PM
Well we know it's from a good source!
jeremyg
07-16-2016, 04:17 AM
Wow cool I was the one who got this off eBay.
EDZIP
07-16-2016, 06:48 AM
Wow cool I was the one who got this off eBay.
From a good source and very handy to have...if you have a bad flash...just pop the proms, flash and install. Great for testing your flash equipment.
jeremyg
07-16-2016, 05:38 PM
Ok. Now that there's 2 chups and 1 bin file what's the best way for splitting the bin file to put onto the 2 chips. I got the mini pro software and it's working fine reading the chips.
EDZIP
07-16-2016, 06:28 PM
Ok. Now that there's 2 chups and 1 bin file what's the best way for splitting the bin file to put onto the 2 chips. I got the mini pro software and it's working fine reading the chips.
This thread has it all:
http://www.gearhead-efi.com/Fuel-Injection/showthread.php?1160-64K-bootable-image-for
The images by forum member 96lt4c4 worked for me. Once you load them..the PCM will communicate again then you can reflash the pcm with your full bin.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.