PDA

View Full Version : Socketed GM LT1 16188051 ECM w/ Programmer


EDZIP
06-29-2016, 02:40 AM
Not Mine..spotted it on eBay (it's in Canada)


http://www.ebay.com/itm/Socketed-GM-LT1-8051-ECM-w-Programmer-/252439692821?hash=item3ac6940615:g:YIIAAOSwM4xXcFI 2&vxp=mtr
steveo
06-29-2016, 06:47 AM
its mine
EDZIP
07-02-2016, 03:47 PM
Well we know it's from a good source!
jeremyg
07-16-2016, 04:17 AM
Wow cool I was the one who got this off eBay.
EDZIP
07-16-2016, 06:48 AM
Wow cool I was the one who got this off eBay.

From a good source and very handy to have...if you have a bad flash...just pop the proms, flash and install. Great for testing your flash equipment.
jeremyg
07-16-2016, 05:38 PM
Ok. Now that there's 2 chups and 1 bin file what's the best way for splitting the bin file to put onto the 2 chips. I got the mini pro software and it's working fine reading the chips.
EDZIP
07-16-2016, 06:28 PM
Ok. Now that there's 2 chups and 1 bin file what's the best way for splitting the bin file to put onto the 2 chips. I got the mini pro software and it's working fine reading the chips.

This thread has it all:

http://www.gearhead-efi.com/Fuel-Injection/showthread.php?1160-64K-bootable-image-for

The images by forum member 96lt4c4 worked for me. Once you load them..the PCM will communicate again then you can reflash the pcm with your full bin.