matching obd2 bin and xdf

[myburb]

I normally only fool with obd1 but the burb is running well enough that I don't fool with it much so looking to read 0411 for interest. I downloaded a couple of late model bins and xdf but they don't seem to display correctly so I must have a mismatch. Could someone point me to a obd2 bin v8/4l80e and a matching xdf for tunerpro rt.
Thanks

[LRT]

I think the only OBD2 XDF that was developed was for 2001(by dimented24x7). Specifically for OS 12202088 (which should also work with 12208322).

Guessing that when the "free" flash tool failed to materialize, all work on these XDFs ended.

[myburb]

Thanks. With that info I was able to get the matching bin/xdf that I needed. As I am sure others have felt, it's too bad the flash capability never went anywhere.

[dave w]

I wish dimented24x7 would have selected the 12212156 OS, which used both 4x and 24x crank position sensors.

dave w

[LRT]

12208322 OS uses either 4x or 24x

[dave w]

12208322 OS uses either 4x or 24xMaybe you can post a 4x 12208322 file (.tun / .ctz / .cal / .bin)?

dave w

[LRT]

Maybe you can post a 4x 12208322 file (.tun / .ctz / .cal / .bin)?

dave w

EagleMark posted one here:

http://www.gearhead-efi.com/Fuel-Injection/showthread.php?1492-2001-TunerCat-Calibration-Files&p=18527&viewfull=1#post18527

He continues to help, despite being gone.