PDA

View Full Version : NOT GOOD, could you please take a quick look



SRTVENOM
04-01-2016, 09:52 AM
I have lots of things out of whack and could use some advice. I'd rather not bother Dave with my inexperance as i'm sure he has better things to do. Any advice or point in the correct direction would be very very much appreciated. Attached are a couple XDL logs from yesterday.

1991 5.7 5-speed T.B.I. ECM-1227747
$42.xdf
$42-1227747-V5.2.adx

Thanks!
wayne

Dr_Grip
04-01-2016, 01:06 PM
What exactly shall I look for in your logs, so, what symptoms are you experiencing?

SRTVENOM
04-01-2016, 01:31 PM
The problems I'm having is the truck dies at idle and while holding a higher rpm (to keep it from dyeing) throttle position. Seems to lose spark when wanting to die. I sometimes can feather the throttle and keep it from dyeing, but only for a very short time. I believe I have a couple problems I’m trying to nail down.

fastacton
04-01-2016, 07:45 PM
You've got an error 51 for the PROM. Re-seat the chip or burn a new one and try again.