4l80e tv tables

[myburb]

Recently I wanted to lower the engage and release speeds on my 4l80e lockup. So I took the tables
normal mode release mph vs tps
normal mode engage mph vs tps
engage vs mph
release vs mph
I lowered all the entries in those tables by 2 mph
result was as soon as I got to the speed that loc should occur there was a continual loc/unloc about once per second. There must be a conflicting entry somewhere. Anyone else run across that or have and idea what might be causing?

[myburb]

The original subject line should be TC rather than tv

[buddrow]

Make sure you have sufficient hysteresis between the lock and unlock speeds or you will get a "gear hunt" as you describe.

Buddrow

[myburb]

I had hoped moving everything by 2 mph would keep all the hysteresis the same so think there must be something else.

[buddrow]

Can you post the bin and xdf you're using?

[myburb]

hope you can see something as i couldnt see anything.