windows 10 and tunerpro

[dusterbd13]

have the tpi based swap in the duster, and its not firing the injectors. so I go to load up tunerpro rt and my aldl cable. cant get the laptop to recognize the cable.

what I'm using is an old aldl cable with a box labeled 10k, all from akmcables.com. have a seriel port to usb adapter that plugs into the usb ports on my laptop.

laptop is a brand new dell that I got about a month ago from bestbuy, loaded with windows 10.

fresh dowmload of tunerpro rt, fresh $8 .bin, .adx. and .xdf.

ecm is a 7727 ecm.

on my old laptop, I used the same stuff and had no problems ($a1 being the only difference).

so what do I need to do to get this thing talking to the ECM?

[RobertISaar]

drivers for whatever USB adapter you're using are correct?

is the correct COM port showing up in tunerpro preferences?

[dusterbd13]

only com option I'm getting is com5, which near as I can tell in windows 10 doesn't correlate to anything.

additionally, I cant find a compatible driver for my usb to serial adapter. so I guess first step will be getting an new adapter, with current software for windows 10.

I hadn't even thought about drivers. I'm just not that computer savvy, I guess.

[RobertISaar]

that's the first thing that came to mind after the driver fiasco involving the FT232 clones that only work with older driver sets.