PDA

View Full Version : Look at my data log and tell me what you think



firemechanic909
02-09-2016, 04:41 PM
Here is a couple of datalogs from my car. 95 z28 lt1 a4. Enigne has 1.6 rockers, pacesetter shorties, dual cats,tb coolant bypass and airfoil.k&n fipk 2.73 gears..
I am noob at this.Thanks

dave w
02-10-2016, 12:16 AM
See attached screen shots for BLM Averages and Sample counts.

Ideally the BLM averages should be 128. Numbers less than 128 are "Rich" and numbers above 128 are "Lean". Sample counts greater than 5 can be considered as useable data.

dave w

firemechanic909
02-10-2016, 07:47 PM
See attached screen shots for BLM Averages and Sample counts.

Ideally the BLM averages should be 128. Numbers less than 128 are "Rich" and numbers above 128 are "Lean". Sample counts greater than 5 can be considered as useable data.

dave w
So im running a little rich?

dave w
02-11-2016, 12:15 AM
In some areas, yes.

The library of information for the LT1 is here: http://www.gearhead-efi.com/Fuel-Injection/showthread.php?335-16188051-and-16181333-PCM-Information-EE-EEB

Post #13 has the VE fixer (rich / lean) spreadsheet.

dave w