Another Newbie (old geek)

[Ricks82]

Thanks for the ad. I'm very interested in learning EFI, including tuning. So I'm trying to sort out my first EFI (learner) project. The materials that I already have laying around are leading me to swapping a 0411 controlled TPI into my 95 S-10. Trying to keep it as cheap as I can, while maintaining the integrity of my daily driver. Actually I'd like to get the TPI 350 laying on my shop floor running on an engine stand first, so I can focus on resurrecting the TPI first. And then maybe a swap into my DD.
Thanks,
Rick

[dave w]

:welcome:

I did something similar. I fabricated a bolt on crank trigger wheel. I use an Edelbrock MPFI intake, not a TPI intake.

http://i239.photobucket.com/albums/ff290/buildabot2002/0411%20SBC/th_0411SBC-1.mp4 (http://i239.photobucket.com/albums/ff290/buildabot2002/0411%20SBC/0411SBC-1.mp4)

http://i239.photobucket.com/albums/ff290/buildabot2002/0411%20SBC/th_0411SBCCrankPosition.mp4 (http://i239.photobucket.com/albums/ff290/buildabot2002/0411%20SBC/0411SBCCrankPosition.mp4)

dave w

[Ricks82]

I like your crank sensor. That's probably the part that I'm most worried about.