View Full Version : Cant find right xdf for s10 with 427 ecm non tbi
BigBanks78
08-13-2015, 09:38 PM
Hello
Does anyone know where I can find out what xdf I use for a 94 Chevy S10 Blazer with a 427 ecm? The motor is a 4.3 V6 with the batch fire spider injector vortec Injecton, not a throttle body type. I have tried OD OE E6 and $31, all do not work. Chip sticker 4088, 1617, 4892 and cover reads BHRJ.......Please and thank you!!
Six_Shooter
08-13-2015, 09:47 PM
What do you mean the XDF doesn't work?
BHRJ comes up as $0D in my list, so any $0D XDF should work.
BigBanks78
08-13-2015, 09:56 PM
Nope all of the xdf's i listed do not work....they all make table look like a Spikey torture devise.
Nasty-Z
08-13-2015, 10:32 PM
BHRJ is in fact $OD , and it works fine in my Tunerpro , Just brought it up and checked it out.
You have either a corrupt copy of BHRJ or a corrupt copy of the $OD XDF.
Both are available on this site under the 16197427 $OD section here : http://www.gearhead-efi.com/Fuel-Injection/showthread.php?303-16197427-PCM-Information-0D
TOM
BigBanks78
08-14-2015, 12:00 AM
yea something is not right, do I need to have OD (tunerprov5) up when I read chip? I downloaded a BHRJ5896.bin from here and it works fine so not sure but it may not matter if downloaded bin will work. Ill try again with OD loaded in tunerpro.
BigBanks78
08-14-2015, 12:05 AM
That worked, Load correct xdf before reading chip....
Thanks guys...more user error:innocent2:
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.