PE delay

[myburb]

On a number of truck 7.4 bins have a PE delay of 70 sec. Reading comments the tps AE is about a second and the map AE is another 2.5 seconds. What takes place between that time and the 70 seconds? I am assuming the 70 second delay is for a long high throttle hill situation to help cool the valves.

[Six_Shooter]

I've always set the delay to 0, it's always woken up the cars when going to WOT.

[myburb]

I have had mine as low as 3 sec and it didn't change much. I will try 0 and maybe that will help my lean pop on mid throttle tip in. If I really mash the throttle from a stop it is fine. Maybe that gets into the tps double delta area that I was wondering about in another thread.