AE & BLM

[myburb]

I am wondering if the blm's go to 128 when AE is activated. I was running yesterday without data connected and as I was going up a steep slow hill, probably 70 kpa and it took a gear and had a lean pop. Info is I have been running with my ve table a little lean but the integrator and blm have been been keeping 14.7 so had been waiting until I burn another chip to fix it so thinking that if it did go back to 128 with AE that would explain the pop. I will get to the new chip soon.

[myburb]

Just for anyone's interest the lean ve was the problem. My integrator does reset on AE and once the pump shot was over things were lean until the integrator became active again.