mansep2
06-28-2015, 06:44 AM
Hi I have just finished putting a 95 Pontiac Firebird 3.4 V6 SFI into my 1973 MGB, and I am trying to isolate some running issues, I have it running well when warmed up although I find the idle is too low at 600 RPM and would like to raise it to 750 RPM but don't know how to do this.
Also it is my understanding that I can clear any trouble codes using this program but really don't see a button to do that.
My main issue is start from cold as it is a mess, it starts but if you touch the gas pedal it runs all over the map RPM wise and is tough to keep running, I have to start it and wait until warmed up before moving off, which is a pain and should not be needed.
any way I am sure I will have lots of questions as I go along.
Paul
Also it is my understanding that I can clear any trouble codes using this program but really don't see a button to do that.
My main issue is start from cold as it is a mess, it starts but if you touch the gas pedal it runs all over the map RPM wise and is tough to keep running, I have to start it and wait until warmed up before moving off, which is a pain and should not be needed.
any way I am sure I will have lots of questions as I go along.
Paul