Pocket Romulator

[sbc350]

http://www.cruisingnight.fi/images/stories/garage/projects/s10-blazer/romulator.jpg

I have this Eprom emulator and trying to find out how to fit it in my tbi box. Is there an adapter to fit the romulator connector to the 24 pin connector of the box? Do I have to remove the plastic case from the box and solder in some other connector in it? Also the romulator connector has more pins..

[PJG1173]

depending on the computer you use an adapter like I use the g1 adapter for my autoprom.

[1project2many]

The 7747 uses a prom holder to locate the prom and to position the legs against the socket. The holder is not easily compatible with the emulator. I ended up replacing the stock socket with a 32 pin ZIF socket and left the extra pins unused.