Moving dashboard

[myburb]

I have been using a $OE ADX and have customized a dashboard for it. I am now doing some testing with a $31 mask and a $31 ADX. What I would like to do is move the $OE info to $31 via cut/paste, copy/ paste etc so I don't have to build the dash from scratch.

[brian617]

Just use the $OE adx for $31.

[myburb]

Thanks, I tried it with OE and it appeared to work correctly but was concerned their was subtle differences that would skew the results. Now I will just go back to it and carry on.

[brian617]

I personally use the $0D ADX. It has more PIDs preinstalled.

[myburb]

I never knew you could, so I can use the OD adx with the OE or 31, right?

[CFI Z51]

I have been using a $OE ADX and have customized a dashboard for it. I am now doing some testing with a $31 mask and a $31 ADX. What I would like to do is move the $OE info to $31 via cut/paste, copy/ paste etc so I don't have to build the dash from scratch.


You can add the dash in < 5 min once you know how..easy as cut / past in note pad , just include the start and end hash tags and increase the item count.... Sticky Here (http://www.gearhead-efi.com/Fuel-Injection/showthread.php?214-TunerPro-Version-5-Tips-thread)

So $0D, $0E and $31 use the same bin locations for the ALDL info , good to know ,for basic stuff should be one for all then....:rockon:

[Six_Shooter]

It's not a supported way to do it, but you can open the ADX in a text editor, copy the section that has the dashboard info and paste it into the ADX you want it in in another text editor.

You will usually have to re-assign some of the gauges once you open it in Tuner Pro again, but it gets the layout moved over.