PDA

View Full Version : UK Newbie with Trans Am



GouldyGTR
02-16-2015, 04:23 PM
Hi guys

I have a 1985 Trans Am with the 5.0 TPI engine,

I have got a missfire on one cylinder and have ordered new dizzy cap, rotor and plugs, the other thing I have is codes 12,13,15 .

if anyone could help with any of these that would be great. the car stalled when i let it idle the other day and the fan is constantly on.

Many Thanks

Jim


http://i111.photobucket.com/albums/n146/civicjimUK/1012402_446422058848730_3481701624490487575_n_zps4 9d9c735.jpg


also found these two electrical connectors on the drivers side which are not connected to anything, it seems the AC has been removed, are these connector for that ??

http://i111.photobucket.com/albums/n146/civicjimUK/image1_zps43801db0.jpg

sturgillbd
02-16-2015, 05:18 PM
Code 12 means ECM is in diagnostic mode and ECM thinks it is operational. Code 13 means the ECM is not seeing voltage swings from the Oxygen sensor. The oxygen sensor is bad, unplugged or or has a wiring problem. Code 15 is an open circuit on the coolant temperature sensor. The coolant temp sensor is bad or has wiring problem. If you are new to GM fuel injection, you probably need to read the links on this page. http://www.gearhead-efi.com/Fuel-Injection/showthread.php?29-FAQ-on-EFI-Conversion-Links-Troubleshooting-Error-Codes The section on diagnostics and troubleshooting will help you get started.

GouldyGTR
02-16-2015, 05:39 PM
Thank you very much!