crankshaft position sensor.

[ericjon262]

anyone know of a place to look up crankshaft position sensors by size and type? I'm trying to find a 3 wire hall effect crankshaft position sensor for my 3500 V6 swapped fiero, and I need one longer than the stock 3500 sensor. I need something more like a GM 3.4 Camaro V6 sensor in a 3 wire setup.

Thank-

Eric

[JeepsAndGuns]

2000 and newer cadillac northstar maybe?

[ericjon262]

2000 and newer cadillac northstar maybe?

what's funny is, I got the reply notification for this, while I was at the parts store asking for a 04 DeVille CPS...

It looks like it will work, but I need to put one in my hands so I can get an accurate comparison.

[JeepsAndGuns]

I have some of the older two wire versions here I can measure. I have no idea if the newer ones are different. I would thinnk the block and crank would be the same, but I have no idea for sure.

[ericjon262]

I have some of the older two wire versions here I can measure. I have no idea if the newer ones are different. I would thinnk the block and crank would be the same, but I have no idea for sure.


I picked up a 3 wire unit today, it's close, but not close enough... I'm going to email the guy who made my external crank trigger and see if he can make me one for the 3500 sensor.