View Full Version : 95 k1500 Gear Ratio change
FTK_Ray
01-30-2015, 05:21 AM
I have been tuning for many years but am new to this software and can't find where to adjust for a gear change on a 16197427 & $0D mask. Any help would be greatly appreciated.
fastacton
01-30-2015, 06:11 AM
Normally you'd make the change by changing the VSSB jumpers. The popular mod is to replace the jumpers with a couple of DIP switches. In other words, you don't normally change anything in the .bin on the 7427. On a '95, the VSSB is underneath the ECM.
FTK_Ray
01-30-2015, 06:26 AM
Thank you for the reply, I've never performed that mod but my question is will this just correct the speedo or will it adjust the transmission scalers also?
fastacton
01-30-2015, 08:52 AM
No, it corrects the signal going to both the speedo and ECM.
FTK_Ray
01-30-2015, 08:27 PM
Thank you for your help
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.