I'm such a newbie in need of help.

[93camarolt1m6]

hello, i have a 1993 z28 m6, i am able to log with tts datamaster but the trial is running out. i downloaded turnerpro rt v5 and for life in me i can not get it working. i done the xdf down load and loaded it in the xdf but now it needs an adx file i tried the ads download no luck, and i cannot find the bdld bin. i have tried finding a software to pull the bin but no luck other than winflash but its out of budget for now. can someone please help me setup tunerpro correctly i have been reading for over a week and im just lost.:mad1:

[93camarolt1m6]

i think i got it. i had to import the ads file from v4 to v5 and add a command to listen for pause at 20ms.

[jthompson122183]

don't know if you found this http://www.gearhead-efi.com/Fuel-Injection/showthread.php?341-16159278-ECM-Information-DA2-DA3

[steveo]

i have tried finding a software to pull the bin but no luck other than winflash but its out of budget for now

that wont work. the 1993 ecm isn't a flash ecm. you need to actually remove the chip to read the bin, or program a new one...

[93camarolt1m6]

steveo i know my bcc is bdld but i can not figure out where to get that bin from. i am running a programmed chip already that solomon at lt1pcmtunning.com done for me. i asked him if he had the file and now waiting for a response.

[steveo]

see attached? no promises, i just googled it and found it in an archive, but i had a look at it with the $DA3 xdf and everything looks ok..