Looking for bootable binaries 94-95 lt1 pcm

[jthompson122183]

Replacing 28f512 plcc32 with sockets and using a genius g540 programmer. im looking for these fileshttp://www.akmcables.com/Obd1-t.bin
http://www.akmcables.com/Obd1-e.bin or any others the work. Any help? Thanks Jonathon

[RobertISaar]

http://www.gearhead-efi.com/Fuel-Injection/showthread.php?335-16188051-and-16181333-PCM-Information-EE-EEB&p=19724&viewfull=1#post19724

[jthompson122183]

ive tried those files and i get a ProgramOperation: Error ****:mad1:
8369837083718372

[fastacton]

The one screen I didn't see is the chip selection. Do you have the right one selected?

[jthompson122183]

ok i come to the conclusion that im not doing something right. for example if i load the bin at 5000 it wil burn to 5000 then stop and error
8377837883768379

[fastacton]

Is this Windows 8? Maybe the G540 doesn't have good drivers for 8? I'm using win7 without any issues, but those aren't the chips I'm burning.

[jthompson122183]

yep windows 8 and installed drivers correctly

[Dewayne_S]

So are you actually flashing the chip(s) that have been removed from the PCM? If so I would love to see a photo of the inside of the PCM showing where the chips are located.

[jthompson122183]

thats what im trying to do
8380838283838381

[Dewayne_S]

thats what im trying to do
8380838283838381
Thanks for the images. I have often wondered what the inside of these PCM's looked like. Sure would be nice to figure out a way to use my ostrich for tuning but it looks like that idea would be a lot of work.

[lionelhutz]

I uses those files to fix my PCM so they are fine. My guess would be there is an issue with your adapter. Have you tried the ID button on that one screen?

[jthompson122183]

if i press ID (Read) or Read config nothing happens or pops up. i think this is fot that id read8387