Need Datalogging Help for 91 Corvette

[aklim]

I don't know what file to use. I have tried 3 different files this morning. Much more and the neighbors will probably throw me a "blanket party" tonight when I am sleeping.

Read my saga HERE (http://www.corvetteforum.com/forums/c4-scan-and-tune/3575499-datalogging-with-moates-aldu-help-needed.html). Trying to conserve space. TIA if anyone has the proper file so it doesn't have to cycle between DA Connected and DA Data Error.

Latest findings: Using A100 lists 6 squares for the "Dash" but not filled. Prom ID is correct but very slow in data acquisition since the values don't change. Refresh rate is probably very slow.

CaptainKawasaki's file: $8D-1227727-1990Corvette.adx shows all 8 gauges seems ok, doesn't show PromID but values are close to the others. Refresh rate is reasonable. Still cycles between DA Data Error and DA Connected

$8D-1227730-90-Y-Car-V1.adx seems ok too. Shows all 8 gauges, No PromID. Also cycles the same way as above.
My first born son will be up for trade for the right file. Will substitute for beer since I have no kids. LOL
So how to trust the values if it is in and out?

[dave w]

I use an ALDL cable to data log with.

Attached are pictures of the Window 7 settings for my ALDL cable. My laptop is set up for Com 10, your laptop might be a different Com port.

I've also attached the $8D .adx file I use to data log with.

Hope this helps,

dave w

[aklim]

I use an ALDL cable to data log with.

Attached are pictures of the Window 7 settings for my ALDL cable. My laptop is set up for Com 10, your laptop might be a different Com port.

I've also attached the $8D .adx file I use to data log with.

Hope this helps,

dave w

I will give it a try this evening. Thanks. Using Moates cable.

[delcowizzid]

you may need to tick the cable echo box in preferences or it will oggle connected not connected as it reads the echo from the data the cable sent

[aklim]

So far, Mangus has taken a file CaptainKawasaki used and cleaned it up some. After a bit of tweaking, it seems to work other than it loses packets of data here and there.

See the saga HERE. http://tunerpro.net/forum/viewtopic.php?t=3721