View Full Version : Looking for 1mb L31 350"R" calibration
Fast355
10-15-2014, 02:54 PM
You may be familiar with the GMT800 trucks GM built for Mexico/South America with the 350. Looking for a stock GMT800 5.7 4L60E file for a 4.3 to 5.7 swap that is underway.
Lextech
10-15-2014, 06:22 PM
I have been looking for one of those for about 6 years. If you do find one, I would love to have a copy.
Jeff
dave w
10-15-2014, 11:00 PM
Maybe a VIN number is available for one of the export GMT800 trucks? I was thinking maybe Tuner Cats would then be able to sell a .cal file for the export GMT800 truck VIN?
dave w
Lextech
10-15-2014, 11:14 PM
Maybe a VIN number is available for one of the export GMT800 trucks? I was thinking maybe Tuner Cats would then be able to sell a .cal file for the export GMT800 truck VIN?
dave w
I would be willing to split the cost if that is a possibility. What I have always wondered is---Do the exports use the 1mb PCM or the older 512kb PCM?????
Jeff
Fast355
10-16-2014, 02:24 AM
I did some digging and I have been unable to find a GMT800 after 2002 with the L31 although I am fairly certain I have seen GM literature to their existance through 2004.
$7K would buy you a really nice looking 2002 GMT800 L31 to reverse engineer.
http://auto.mercadolibre.com.mx/MLM-459785097-400ss-2002-impecable-_JM
Lextech
10-16-2014, 02:39 AM
Since that is a 2002, it probably uses the 12200411 PCM and the same or very similar calibration to our Express Van. A 2004 Vortec 5.7 calibration is what I would like to have if it exists.
Jeff
dave w
10-16-2014, 04:26 AM
I'm wondering, why would using the 1 meg PCM be more desirable than using the '0411 512K PCM for a 5.7 liter SBC (assuming 24x CKP)?
Flex Fuel?
Processor Speed?
RAM Size?
Expanded Fuel & Spark Tables?
Better for "Boost" (supercharged / turbo charged)?
Transmission Control?
dave w
Lextech
10-16-2014, 05:39 AM
I'm wondering, why would using the 1 meg PCM be more desirable than using the '0411 512K PCM for a 5.7 liter SBC.
dave w
I can't speak for Fast355 but, for me it would be something to play with. It would be neat to try and piece together a DBW, 4x engine. Then, maybe try the Flex Fuel deal.
Jeff
Fast355
10-16-2014, 08:05 AM
I can't speak for Fast355 but, for me it would be something to play with. It would be neat to try and piece together a DBW, 4x engine. Then, maybe try the Flex Fuel deal.
Jeff
Some of the newer marine intakes are coming with a LS 4-bolt flange on them and a fly by wire throttle.
I am trying to keep the V6 style 1mb PCM as I believe it runs the gauge cluster in a GMT800 truck.
If I go DBW it will be with a 58x setup and I will convert to a 6L80E. I think my Express would be a towing monster with the torque of a hopped up L31 5.7, a 4.x first gear and a 4.10 gear out back. If I use the newer PCM I will put a workhorse cluster in it too. Only has a speedo to 85 mph, but has a tach and a more modern GMT800 look.
I know this is a little old. But if you would still like this. And have access to a spare PCM and TIS2000. This Vin 3GBJC34R95M100001 should get you the export L31 bin file. It uses OSid 12592618.
Mike
Lextech
04-10-2015, 04:26 AM
Hi Mike.
I would very much like to have that bin file. I will PM you my e-mail address.
Thank You VERY Much.
Jeff
Fast355
04-10-2015, 03:28 PM
Hey Mike,
I would like the bin file as well. I will PM you my email address as well. Might come in handy some day soon, because I want to put a 383 L31 in an 03-04 4.3 RCSB truck.
Thanks,
Chris
dave w
05-08-2015, 03:50 PM
Here is the .bin file.
Thank you very much for posting the above .bin file.:thumbsup: It shows to be OS 12592618, which is shared with other 2005 GM vehicles.
Can I include the above .bin with the other library of 2005 .bin files gearhead-efi members have shared here? http://www.gearhead-efi.com/Fuel-Injection/showthread.php?1516-2005-TunerPro-Bin-Files
dave w
Fast355
05-08-2015, 06:01 PM
Thank you for obtaining a copy of a bin for these trucks. I knew that they existed. On a side note that .bin is for a 5.7/Manual transmission and it is also without EGR.
dave w
05-08-2015, 06:31 PM
On a side note that .bin is for a 5.7/Manual transmission and it is also without EGR.
The .bin will open in EFI Live, which allow for segment swaps for different transmission options. Tune Depot has a 4.3 / 1 Meg manual trans .ctz with the same OS.
dave w
kur4o
02-09-2021, 12:13 AM
Dig around for l31 1 mb vin and managed to find some here
http://www.free-vin-decoder.com/chevrolet/silverado%201500%20-%2003,43,53%20bodystyle%20-2wd-/2006/3GCEC14X36G263145
Here are some files I build from p/n.
1project2many
02-15-2021, 05:36 PM
Wow. Thank you. This should be a big time saver for folks.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.