(New here) Ecm 1228062 91 s10 4.3 (t) Vin "Z" eProm Id's?

[Unorthodox122]

Oh and its an AUTOMATIC
Okay,. So I'm sorry if I'm posting in the wrong forum, or if it's posted somewhere. I'm New here, Names Joey, just came across this searching for an ADLD cable, then saw all the BIN of Proms, and figured hopefully someone could help me.
Long story short, I was told my ecm was going bad (eeprom), and while at Pick n pull I grabbed a few ecm on their half day special, Im hoping you could tell me (if they havent been overwritten) what they are..

ATBA 7594
EB4(F)/J6/P
ZX01A1CV
AB41

AWLN 8041
JT8(6)/J6/P
LFIVZ719
AD01

AVMJ 1278? (cant see numbers)
jt8(6)/j6/p
LFIVZ891
AE02


And a small memcal?
16051637
2 circled 9022

[dave w]

Oh and its an AUTOMATIC
Okay,. So I'm sorry if I'm posting in the wrong forum, or if it's posted somewhere. I'm New here, Names Joey, just came across this searching for an ADLD cable, then saw all the BIN of Proms, and figured hopefully someone could help me.
Long story short, I was told my ecm was going bad (eeprom), and while at Pick n pull I grabbed a few ecm on their half day special, Im hoping you could tell me (if they havent been overwritten) what they are..

ATBA 7594
EB4(F)/J6/P
ZX01A1CV
AB41

AWLN 8041
JT8(6)/J6/P
LFIVZ719
AD01

AVMJ 1278? (cant see numbers)
jt8(6)/j6/p
LFIVZ891
AE02


And a small memcal?
16051637
2 circled 9022



Prog ID
BCC
Size
Year
Release
Date
Eprom

ECM
Prom ID
Scan ID
Platform
Engine
Disp.
Trans
Trans Type
Gear
Ratio







ATBA
4.00 KB

1991
32797
16147593

1228062
7594
3151
S1
LB4
4.3
MD8
AUTO








AWLN
4.00 KB
1988
33045
16156045
1228062
6041
5931
S1
LB4
4.3
MD8
AUTO
GU4




:welcome:

I could only find information on the first two.

dave w

[Unorthodox122]

You are awesome, thank you dave,
Would either of these work with my 91 s10?
What would happen?

[dave w]

You are awesome, thank you dave,
Would either of these work with my 91 s10?
What would happen?

PROM chips rarely go bad. The ECM is more likely to fail than the PROM.

What is the PROM code you are using now?

dave w

[Unorthodox122]

With the Ecm I grabbed from Pick n Pull, thats in the truck now the combination is

Prom:
AMRW 9600
JT8(G)/J6/P
LFIVK350
AH37

eCM:
1228062 AMRW
8CAMRW
K190901007

Memcal:
16051637
2circled 8907

Original Ecm
1228062 ATBA
86ATBA
K211491880
16143151

[RobertISaar]

there is a AUMJ-1278.
16051637 isn't a MEMCAL, it's a CAL-PACK, which from what i remember, controls the limp-home stuff.

AMRW is a ~88 S/T-10 with a 4.3/4 speed auto and 3.08 or 3.42 gears

[Unorthodox122]

there is a AUMJ-1278.
16051637 isn't a MEMCAL, it's a CAL-PACK, which from what i remember, controls the limp-home stuff.

AMRW is a ~88 S/T-10 with a 4.3/4 speed auto and 3.08 or 3.42 gears

Thank you for the reply, So is it safely used with my engine? Or my year s10 4.3?

[RobertISaar]

i'm sure it would work, how well it works is up in the air until it is tried.

[Unorthodox122]

I'm trying to find one that was used in it, or stock. It's been acting real funny. Would some symptoms be bogging down when acceleration, hard late shifts, high idle?

[dave w]

I'm trying to find one that was used in it, or stock. It's been acting real funny. Would some symptoms be bogging down when acceleration, hard late shifts, high idle?

The more likely reason for the symptoms would be vacuum leak, maybe ignition control module sending bad reference pulses to the ECM. Computers usually fail completely or work without issue. PROM chips failures are extremely rare, almost unheard of.

dave w

[Unorthodox122]

Thank you both for your help. I like it here.