PDA

View Full Version : General EFI information and links AKA "FAQ"



Six_Shooter
05-12-2014, 03:00 AM
Hardware

'7747 Flash Chip Conversion (http://www.gearhead-efi.com/Fuel-Injection/showthread.php?172-7747-Flash-Chip-Conversion-(27SF512))

Installing Moates G1 adapter (http://www.gearhead-efi.com/Fuel-Injection/showthread.php?1591-Installing-G1-Adapter-form-Moates)

EFI Fuel Pump Uprade (http://www.gearhead-efi.com/Fuel-Injection/showthread.php?354-EFI-Fuel-Pump-Upgrade)

Stock TBI fuel pressure regulator spring measurments (http://www.gearhead-efi.com/Fuel-Injection/showthread.php?1215-Stock-TBI-Fuel-Pressure-Reglator-Springs-Measured)

IAC wiring for Big Block and Small Block (http://www.gearhead-efi.com/Fuel-Injection/showthread.php?1227-1227747-IAC-wiring-to-IAC-for-Big-Block-and-Small-Block)

DIY TBI Adjustable Fuel Pressure Regulator (http://www.gearhead-efi.com/Fuel-Injection/showthread.php?1217-DIY-TBI-Adjustable-Fuel-Pressure-Regulator)

MEMCAL mod for flash chip (http://www.gearhead-efi.com/Fuel-Injection/showthread.php?178-427-PCM-Memcal-Mod-for-27SF512-Chip)

Building a GM Small Cap Distributor for TBI conversions (http://www.gearhead-efi.com/Fuel-Injection/showthread.php?21-Building-a-GM-EFI-Small-Cap-Distributor-for-TBI-Conversions!)


Tuning

Adjusting tables with BLM data Tutorial (http://www.gearhead-efi.com/Fuel-Injection/showthread.php?1895-Adjusting-VE-Fueling-tables-with-BLM-data-Tutorial!)

E10 tuning with Wideband O2 sensor (http://www.gearhead-efi.com/Fuel-Injection/showthread.php?1741-AFR-Gasoline-E10-Wide-Band-02-sensor-tuning-using-Lambda)

'7747 VE1 and VE2 fuel tables (http://www.gearhead-efi.com/Fuel-Injection/showthread.php?1024-1227747-42-VE1-VE2-Fuel-Tables)

Initial setup of TBI and MPFI systems (http://www.gearhead-efi.com/Fuel-Injection/showthread.php?581-Initial-Setup-of-TBI-TPI-and-MPFI-systems-Min-Air-Adjust-TPS-set-and-Fuel-Pressure)

Chart of injector voltage offsets (http://injector-rehab.com/shop/lag.html)

Misc

Reading stock GM PROMs with BURN1/2/AutoProm and Tuner pro/Flash n' Burn (http://www.gearhead-efi.com/Fuel-Injection/showthread.php?1477-Reading-Stock-GM-Chips-Burn-1-Burn-2-AutoProm-TunerPro-Flash-and-Burn)

Reading OBD1 GM Error Codes (http://www.gearhead-efi.com/Fuel-Injection/showthread.php?52-GM-ECM-Reading-Error-Codes-CEL-SES-Light)

Setting up ADC channels on APU1 (http://www.gearhead-efi.com/Fuel-Injection/showthread.php?829-AutoProm-ADC-Interface-Channels-Set-up-in-TunerPro!&highlight=apu1)