New TP Version Launched - 5.00.8853.00 (11/26/15)

[RobertISaar]

download page: http://tunerpro.net/downloadApp.htm
direct(and updated when necessary) link: http://tunerpro.net/download/SetupTunerProRT_v500_8944.exe
non-RT direct link: http://tunerpro.net/download/SetupTunerProFree_v500_8944.exe

5.00.8942.00 (General Release) (12/14/16)
•Added new functionality to Bin Stacker: ability to choose where null data goes, and to choose the null byte. This is useful for Ford stacking.
•Added the abiliy to specify adjustment equations in table and function cells. For instance, if a cell has "1.2" in it, you can enter "=*2" to multiply it by 2 to get "2.4". or "=+ 3.2" to get "4.4" as a result, etc. This does not yet work in the scalar editor.
•Added very basic mouse zooming to data acq monitors. Hold the Ctrl key and drag your mouse to zoom in on the time axis. Use the slider to reset the zoom. There are still several issues to work out.
•Moved to Visual Studio 2015 compiler, toolset, and runtime redist. The redist bloats the download by 13MB.
•Improved Quarterhorse initialization and bank support
•Fixed issue with browsing for bins where you're prompted to create a file when browsing to a subdirectory
•Fixed potential crashes when compare bins are different sizes from the editable bin

[Six_Shooter]

I was just thinking that very thing. Basically copy over the change log as well.

[RobertISaar]

probably isn't a bad idea..... i'll do an edit in a minute.

it could be some kind of placebo effect(or perhaps some kind of uncluttering occurred), but this release feels SUPER responsive.

took a minute to reconfigure some of the stuff that got reset upon install, but otherwise.....

[Six_Shooter]

I think it's placebo, Feels the same as it has for a long while now, to me.

[brian617]

'Fixed issue where when comparing bins in a 3D chart, axes were
not updated apporpriately when they are defined internally"


This mean the 3d maps match the 2d's? That drives me nutts lol

[RobertISaar]

5.00.8383.00 (General Release) (4/30/14)




Fixed issue where a particular piece of hardware wasn't
properly detected
Fixed issue introduced in build 8369 where Moates Ostrich 2.0
address watch (tracing) used incorrect addressing
Fixed issue with ELM327 plug-in where first byte of 2-byte PID
was always 0
Updated ELM327 plug-in version number to 0.6

[RobertISaar]

5.00.8414.00 (General Release) (8/25/14)



Fixed issue that prevented tables from being saved when a base
offset is used that results in the table's unadjusted address being outside of
the bin
Fixed issue where editing XDF table properties in the XDF
editor while the table is open didn't result in the table reflecting the changes
Fixed issue where adding a new ADX item, then immediately
dragging it to a new index in the tree without setting an ID, would result in an
endless loop of errors



Known issue to be fixed in next build:



issue that may cause table axis links not to be resolved
on XDF load

[RobertISaar]

5.00.8519.00 (General Release) (11/19/14)


XDF Item Finder toolbox is now resizeable
When a table graph is open and a new compare bin is loaded from the compare menu, the graph is now refreshed to show the new bin
When opening a new XDF with the XDF Item Finder toolbox open, the toolbox is now automatically closed
Fixed crash when attempting to connect to ALDL stream in AutoProm mode with no AutoProm attached to the PC
Fixed issue with keyboard shortcut assignment where attempting to assign the Escape key resulted in the shortcut window closing instead of assignment of the key itself
Fixed issue where choosing "Save As..." when saving an ADX didn't cause the editor title bar to update with the new filename and path
Fixed issue where recursion in a table or function equation wasn't properly being tracked and reported, resulting in over-reporting of recursion
Fixed a subtle but particularly heinous bug where XDF conversion equations that were recursive could result in variables with the same name being overwritten during recursive calculation (e.g. "CELL(ROW()+1; 0; FALSE) - X", where the value of X is set in the initial calculation frame, then overwritten when the CELL function is called with the value of X in that calculation frame))
Fixed issue with patches that would falsely report a buffer is patched when a portion of it is not actually patched
Fixed issue where table axis links may not always be resolved on XDF load. Current fix has very minor performance implication with large XDFs. Future improvement planned.

[Six_Shooter]

5.00.8606.00 (General Release) (3/17/15)

Exposed the ability to specify an ADX command to send when scanning is paused and unpaused. This required that the ADX Defaults be moved to the "More" tab in the ADX Header editor.
Made vast improvements to the Moates Onboard Logger interface (for the Demon and Superlogger hardware), including multi-threading to keep the UI from locking up during long operations, auto-population of ADX for export, flash memory export to and import from file, and much more
Added a very naive XDF parameter bulk editor. It will change endianness, sign, and will offset specified positive or negative amount all address equal to or greater than the offset
Fixed issue where passing in a checksum element size less than 8 bits could result in an infinite loop during checksum calcutation
Fixed issue where ADX List View separaters weren't being updated in real-time in the ADX editor while typing or changing separator text color
Fixed issue where function graphs couldn't be interacted with
Fixed issue where command timeouts weren't being passed to the port when running in shared emulator<->dataAcq mode

[RobertISaar]

5.00.8713.00 (General Release) (7/11/15)



Simplified ADS importation. An ADS now loads immediately without being prompted to save, and the user is prompted to save before closing TunerPro or opening another definition, and added "save" and "save as" acquisition menu items
Added buttons to clear explicit data acquisition links in XDF tables and scalars
Added save and save as menu items to the Acquisition menu for datastream definitions
Compare bins can now be loaded when no primary bin is loaded
Difference tool will now allow you to compare bins when no primary bin is loaded
Fixed issue where 8-bit uploads to 16-bit emulators such as the Roadrunner failed
Fixed issue where ADX header pause and unpause commands aren't saved
Fixed hang when using the zoom feature in the ADX Monitor tab
Fixed possible delay when opening files from a removable path with no media in the drive. For common paths only (XDF, bin, ADX).
Fixed issue where colors could be repeated too frequently when adding ADX items to monitors through the context (right-click) menu
Fixed issue where explicit DA links in XDF Tables and Scalars were saved without hitting the apply button
Fixed issue where incrementing/decrementing items in the summary list didn't take the XDF global offset into account, and didn't properly align for 16-bit hardware (e.g. Roadrunner)

[f85gtron]

I can't get it to work because of old laptop and xp. I tried to find 500.8200, but the links are dead.

[Six_Shooter]

I can't get it to work because of old laptop and xp. I tried to find 500.8200, but the links are dead.

I don't know if you've resolved this or not, but I just checked (2015-09-06) and the 500.8202 RT link worked for me, installed as well.

[f85gtron]

Thanks. I gave in and bought a Windows tablet. It works perfectly. I guess it's about time I crawl out from the rock I'm under.

[RobertISaar]

WAAAAAY behind this release. I guess that speaks volumes for how well TP currently does everything it does if you don't feel the need to constantly check for updates.

5.00.8853.00 (General Release) (11/26/15)


Added the ability to double click on an item in the acquisition Item List panel to go straight to its editor page in the ADX Editor (useful!)
Added the ability to right click on a gauge in the acquisition dashboard panel to go straight to the dashboard's editor page in the ADX Editor (useful!)
Added validation to log file export to csv/tsv to ensure that outputted strings don't contain the delimiter (e.g. a bitmask state string has a comma in it when exporting to comma-separated value file), which will cause columns to shift in the output
Added change tracking to the ADX editor. Now, when changes are made, you'll be prompted to save when hitting the window close or cancel buttons in the ADX Editor
In the function editor, the save button icon changes when in emulation mode, matching the other editors.
When the bin compare tool is open and a new XDF is loaded, the compare tool is automatically closed, since the results are no longer valid
Fixed issues around emulation being enabled, then emulation hardware being released without first disabling emulation
Fixed issue where apply button wasn't enabled when editing the conversion equestion for XDF Scalars
Fixed issue where Endianness in XDF checksums wasn't being loaded from file correctly, resulting in the little endian checksums losing their little endianness when the XDF was loaded, leading to incorrect calculation
Fixed issue where ADX Bitmask true and false strings weren't escaped, which is required for XML strings
Fixed crash in item finder (Ctrl + F) when clicking in the whitespace after the returned item list
Fixed several issues with CSV->XDF importer, including broken row and column count field, and occasional skip of last field in a line
Fixed crash when browsing for an ADX item to display in a dashboard gauge, but selecting nothing and clicking "OK"

[RobertISaar]

5.00.8942.00 (General Release) (12/14/16)


•Added new functionality to Bin Stacker: ability to choose where null data goes, and to choose the null byte. This is useful for Ford stacking.
•Added the abiliy to specify adjustment equations in table and function cells. For instance, if a cell has "1.2" in it, you can enter "=*2" to multiply it by 2 to get "2.4". or "=+ 3.2" to get "4.4" as a result, etc. This does not yet work in the scalar editor.
•Added very basic mouse zooming to data acq monitors. Hold the Ctrl key and drag your mouse to zoom in on the time axis. Use the slider to reset the zoom. There are still several issues to work out.
•Moved to Visual Studio 2015 compiler, toolset, and runtime redist. The redist bloats the download by 13MB.
•Improved Quarterhorse initialization and bank support
•Fixed issue with browsing for bins where you're prompted to create a file when browsing to a subdirectory
•Fixed potential crashes when compare bins are different sizes from the editable bin

[Eds]

(General Release) (March 1, 2019)

* Fixed issue that caused values in the ADX listview to show up as dots, or boxes and apostrophes on newer builds of Windows (finally!)
* In the difference tool, the "copy selections" buttons are now hidden/shown properly based on which column the active bin is in.
* Fixed issue where checksum plug-ins aren't available for selection in the checksum editor if a previous XDF hasn't been loaded first.