Looking for 2002 corvette bin

[mecanicman]

Anyone have a 2002 corvette LS1 t56 bin they would be willing to post? Working on a cool swap project I have donated my time to, will share some more details after the trip to the dyno in February.

[ericjon262]

Anyone have a 2002 corvette LS1 t56 bin they would be willing to post? Working on a cool swap project I have donated my time to, will share some more details after the trip to the dyno in February.

I attached the two .cals I have if that helps.

[mecanicman]

Appreciate the thought and effort, unfortunately I need it to be bin files.

[Buzz]

Appreciate the thought and effort, unfortunately I need it to be bin files.

What software are you using, or what are you trying to achieve, that you require it in *.bin format ?

[Lextech]

Here you go.

Jeff

[mecanicman]

Here you go.

Jeff

Thank you very much!

[mecanicman]

What software are you using, or what are you trying to achieve, that you require it in *.bin format ?

I am odd guy out around here it seems, use hpt primarily. But hpt has some limitations so I edit a few things in hex editors and more recently tunerpro before I put through hpt.

[Buzz]

Roger that ... now I know where you are coming from ... I can also post in HPT format if you need.

I have the 1999 to 2006 PCMs fairly well mapped out ... if there is ever something you need changed that is not available in HPT (like Lean Cruise, knock sensor type, etc.) I can change these, and then post as an *.hpt file.

[mecanicman]

Roger that ... now I know where you are coming from ... I can also post in HPT format if you need.

I have the 1999 to 2006 PCMs fairly well mapped out ... if there is ever something you need changed that is not available in HPT (like Lean Cruise, knock sensor type, etc.) I can change these, and then post as an *.hpt file.

Appreciate the offer and will keep it in mind.

[mecanicman]

Said I would update this later and since they have posted this stuff online I guess its ok now. I met Rob through some mutual friends. Once I saw what he was doing I had to get involved. Hoping to hit the dyno in about a week.

If you follow the link, watch the bottom video first then top, they are posted out of order.

http://www.alwaysdtf.ca/projects/projectparsons/

[EagleMark]

He's quite an inspiration! I wish GearHead-EFI.com was a profit site as he would be someone to sponsor!