Newbie here trying to learn how to datalog just to monitor.

[dub]

Hello guys I am trying to see how my cavalier is running and am having a difficult time trying to figure out what files I need to do so. The chip n my ecu is stamped with ATMF. After looking at the tables I get this information.

http://www.v6z24.com/jbodyforum/download,id,59425.html



88

ATMF

32.00 KB

1990

32769

16145240

1227730

5241

5161

JB

LH0

3.1

MG2

MAN

FX8




Now that I have this information I need to know what files I need to download in order to start logging. Thank you so much in advance

[dave w]

Hello guys I am trying to see how my cavalier is running and am having a difficult time trying to figure out what files I need to do so. The chip n my ecu is stamped with ATMF. After looking at the tables I get this information.

http://www.v6z24.com/jbodyforum/download,id,59425.html



88

ATMF
32.00 KB
1990
32769
16145240
1227730
5241
5161
JB
LH0
3.1
MG2
MAN
FX8



Now that I have this information I need to know what files I need to download in order to start logging. Thank you so much in advance



Here is a good place to start...http://www.gearhead-efi.com/Fuel-Injection/showthread.php?392-1227730-16197128-ECM-Information-88

Download the files below for TunerPro RT to work with the ALDL cable.

dave w

[dub]

Thank you so much!

[dub]

Ok so I set it up using the instructions found from the TP site. I clicked Test For Valid Interface Using Settings to make sure the correct com port was selected and it says "Successful" however when I connect it to my car and tell it to "connect" nothing happens. Any input?

[dave w]

I'm wondering how the set up was done for the ALDL cable? The USB driver is on the CD / DVD that came with the cable? Maybe try a different com port Com 1, Com2, .... Com10 .... Com who knows what number works? Stop data logging if the connection fails, then try a different Com Port number.

dave w

[dub]

I'm wondering how the set up was done for the ALDL cable? The USB driver is on the CD / DVD that came with the cable? Maybe try a different com port Com 1, Com2, .... Com10 .... Com who knows what number works? Stop data logging if the connection fails, then try a different Com Port number.

dave w

Still nothing

[dave w]

Still nothing

Maybe you can send me a PM with a phone #, and time we can talk tomorrow afternoon? I'll need you to be with the vehicle and have the laptop connected when we are on the phone.

dave w

[EagleMark]

I'm thinking $88 is F body Camaro only. Try looking up your files here:
http://www.gearhead-efi.com/Fuel-Injection/showthread.php?523-TunerPro-ADX-and-XDF-lookup!-Find-your-files-here!

[dub]

I looked up the files and it does show a different file for a 90-93 Jb however I have the 1227730 ecm. I did a 5 speed swap and took the ecm from a 90 z24 with the 3.1

[dub]

this is what I need



1227730
27C256
$A1
91 - 93 J & L & W Cars LH0 3.1L V6
$A1.xdf‎

A1.ads‎
A140.ads ?
A140.ds ?

Yes
Yes
http://www.gearhead-efi.com/Fuel-Injection/showthread.php?391-1227727-1227730-ECM-Information-A1 (http://www.gearhead-efi.com/Fuel-Injection/showthread.php?391-1227727-1227730-ECM-Information-A1)

[EagleMark]

The ATMF chip says it's an $88 so I was wrong. But the ADX for data could be different if not a F body/Camaro. Just an idea why your not getting data...

[dave w]

$A1 information http://www.gearhead-efi.com/Fuel-Injection/showthread.php?391-1227727-1227730-ECM-Information-A1

dave w

[dave w]

Updated .adx file.

[dub]

Maybe you can send me a PM with a phone #, and time we can talk tomorrow afternoon? I'll need you to be with the vehicle and have the laptop connected when we are on the phone.

dave w

I owe a HUGE thanks to Dave! He got the program running and is such a nice guy! Thank you so much for your time and dedication!

[dave w]

I owe a HUGE thanks to Dave! He got the program running and is such a nice guy! Thank you so much for your time and dedication!

The TeamViewer download http://www.teamviewer.com/en/index.aspx?pid=google.tv.s.us&gclid=CJzWv-CH1rsCFc6TfgodLRwA2g made it possible! Being able to share control of your laptop is an excellent way to get things working!:thumbsup:

dave w

[jim_in_dorris]

Thanks Dave for the link. Most of my computer customers are 120 miles away, and I can't always drive to their house. This will help. I have used other software, but the trial ran out.

[dave w]

Thanks Dave for the link. Most of my computer customers are 120 miles away, and I can't always drive to their house. This will help. I have used other software, but the trial ran out.
I've used Mikogo in the past http://www.mikogo.com/product/what-is-mikogo/ This was my first experience with TeamViewer.

dave w

[EagleMark]

TeamVeiwer is what I use and the only one that is even close to affordable for in frequent use.