netural safety switch

[gopher]

I have a question about the netural safety sw. wiring
2000 s 10 4.3 v6 wiring harness auto trans.
putting it in a street rod.
Ok question is: on the plug at the trans sw I have the six wires in it
three of these i need to know what they go to.
I have labled one as trans mounted netural safety sw feed output. ( top row second hole from left)
The next one is labled starter relay feed ( not going to use the relay) ( bottom row left hole)
the last one is labled backup light monitored. ( bottom row hole from left)

Thanks for your help

gopher

[RobertISaar]

does this look right?

http://imgur.com/WYrMZDx

[Buzz]

Here's another one to look at ....

[gopher]

yes it does that is the plug end
would like to know where the other ends go

thanks for your help
gopher

[Buzz]

When undertaking a DIY project, the first purchase made should be a quality set of shop manuals ... money well spent to be able to complete the project yourself, and save thousands in labor fees.