damanx
11-10-2013, 03:58 AM
It's taking me a bit, but the majority of it's done.
I relocated the coil to the other side of the distributor to get it and the spark plug wires away from the ECM wire harness. Rerouted the harness for the TPS, IAC, MAP and CTS. Also moved the MAP sensor from the firewall to closer to the MAP port on the TBI.
Will get better pics shortly since the cell phone sucks.
Before:
http://i761.photobucket.com/albums/xx254/xwarp/S-15%20truck/TBI%20Install/DSCN2412_zps7bdfd296.jpg
After:
http://i761.photobucket.com/albums/xx254/xwarp/IMG_20131109_172545_zpsffeb27b3.jpg
I relocated the coil to the other side of the distributor to get it and the spark plug wires away from the ECM wire harness. Rerouted the harness for the TPS, IAC, MAP and CTS. Also moved the MAP sensor from the firewall to closer to the MAP port on the TBI.
Will get better pics shortly since the cell phone sucks.
Before:
http://i761.photobucket.com/albums/xx254/xwarp/S-15%20truck/TBI%20Install/DSCN2412_zps7bdfd296.jpg
After:
http://i761.photobucket.com/albums/xx254/xwarp/IMG_20131109_172545_zpsffeb27b3.jpg