damanx
11-08-2013, 03:03 AM
Video below.
Using a timing light and a timing analyzer, both are within 1 degree of each other and are both reading about 5 degrees higher at the crank than what TunerPro is showing with the Spark advance hack applied in the $42 xdf.
How do you adjust for this?
Edited to add: Figured out how to do this in the adx file.
http://www.youtube.com/watch?v=ixteljpA7SI
Using a timing light and a timing analyzer, both are within 1 degree of each other and are both reading about 5 degrees higher at the crank than what TunerPro is showing with the Spark advance hack applied in the $42 xdf.
How do you adjust for this?
Edited to add: Figured out how to do this in the adx file.
http://www.youtube.com/watch?v=ixteljpA7SI