PDA

View Full Version : 1227165_160.ads



istter1
10-12-2013, 04:03 AM
Any help is accepted.87 corvette Windows 7/ Moates extreme aldl 0n open 32b.xdf/
1227165_160.ads
located cable

I have gone to definitions copied correct files. followed directions

[http://www.gearhead-efi.com/Fuel-Injection/showthread.php?466-TunerPro-starter-Tutorial !-New-users-this-is-a-must-read!-)

I followed what I found

I load everything and it is not connecting
several times

ready to install new chip from PCM of NC
want to load data from old prom first

my vet is 1987 y body

any help
feeling stupid

EagleMark
10-12-2013, 04:40 AM
I moved your post to a seperate thread...

Well don't feel stupid, that is a problematic ECM for data in the first place.

Second if you started with an ADS file you need to Import it and TunerPro will prompt you to save it as a newer version ADX file.

Third there are some real issues with FTDI drivers lately! So read this Cable Installation and in this post there is a link to new driver issues.
http://www.gearhead-efi.com/Fuel-Injection/showthread.php?1557-Cable-Installation-to-TunerPro-RT

istter1
10-12-2013, 06:18 AM
I moved your post to a seperate thread...

Well don't feel stupid, that is a problematic ECM for data in the first place.

Second if you started with an ADS file you need to Import it and TunerPro will prompt you to save it as a newer version ADX file.

Third there are some real issues with FTDI drivers lately! So read this Cable Installation and in this post there is a link to new driver issues.
http://www.gearhead-efi.com/Fuel-Injection/showthread.php?1557-Cable-Installation-to-TunerPro-RT

my driver is
2.8.30.0

I am going to install a different driver

hope that works
https://dl.dropboxusercontent.com/u/2242747/CDM%202.08.14.zip
Steve
Thanks for help

istter1
10-12-2013, 07:26 AM
Changed driver . No luck. when cable plugged into vet shows disconnected. Unplug from vet shows ok.
Will figure it out.
everything worked in beta 5.
just had incorrect information displayed

EagleMark
10-12-2013, 07:47 AM
Are you clicking the Connect Icon? Double Arrows...

istter1
10-12-2013, 07:52 AM
yes and tried the other method

loaded Real Time
will test tomorrow

istter1
10-12-2013, 07:48 PM
Are you clicking the Connect Icon? Double Arrows...
Tried real time no problems. Found the information below from Tuner Pro will try using the 10k and see what happens.

Thanks for all your help. Learning so much. This is a great site.

"I have purchase moattes "xtreme aldl " cable and box and have gone to
tools/preferences aldl/emulation and selected "test for valid cable using
settings", it returns with --"cable found and functional". but when selecting
the cable icon it says at the bottom "initializing hardware" then "hardware
not found". what am i doing wrong ??? please helpwhat do i need to scan . I have an 87 vett moattes usb cable and obd1
connector

Tuner Pro suggest the cable should be on 10k
it also says that The initialize hardware is for emulators, it does not get used with the ALDL cable
You need to load the correct ADS file, then use the aldl connect button in the tool bar (two blue arrows). If I'm not mistaken you will need to set the resitor switch on the cable to 10K for your ECM.

http://tunerpro.net/forum/viewtopic.php?t=1667

EagleMark
10-12-2013, 08:00 PM
I believe these 1227165 ECM do need 10K to start Data Flow, then turn off...

istter1
10-12-2013, 09:40 PM
I believe these 1227165 ECM do need 10K to start Data Flow, then turn off...

Love it you answered my next question. Turn off after Data flow starts

Thanks Steve

RobertISaar
10-12-2013, 11:31 PM
I believe these 1227165 ECM do need 10K to start Data Flow, then turn off...

yes.

at least for 8192 data, for 160, i don't remember if it is a constant stream or waits for the 10K to start doing that too.

istter1
10-13-2013, 02:31 AM
yes.

at least for 8192 data, for 160, i don't remember if it is a constant stream or waits for the 10K to start doing that too.

Well getting closer. Error comes up and blinks with blue light on.

istter1
10-13-2013, 05:40 PM
This is from another forum my question is will the data be correct if I use this change?
"Quote:


Originally Posted by 87 Vette Owner
http://www.thirdgen.org/techboard/images/smilies/iagree.gif Good question - which ADS (ALDL definition file) should be used in TunerPro RT when the conversion from $32B to $6E has been done? I'm actually at this stage now.

Did you set up Tuner Pro to use "AutoProm" as the datalogging device type?

If you are datalogging (or trying to) using the AutoProm / TunerPro combo, I believe the horizontal switch needs to be towards the USB port, and the vertical switch needs to be in the top position for the 10k resistor used with the 165 ECM ALDL interface.



Yup, I got all that and I actualy got it to give me the blue window saying that it connected. But I still wasnt getting anything, the dash was all 0.0 and none of the other things had readings either. I will try to mess with it more this week if I get time.




I don't beleive there is anything in the memcal that would prevent the datalogging from happening(other than the code). The aldl operation will follow the mask, so you should use the 6E if the code was changed to 6E. When running $6E, use the 1227165_6E.ads file included with TunerPro. If it doesn't connect the first try and you're sure your ALDL settings are correct, then hit connect again.

http://www.thirdgen.org/techboard/diy-prom/362848-32b-6e-works-great.html






http://www.thirdgen.org/techboard/images/buttons/garage.gif (http://www.thirdgen.org/techboard/vbgarage.php?do=view&id=9178)

http://www.thirdgen.org/techboard/images/buttons/quote.gif (http://www.thirdgen.org/techboard/newreply.php?do=newreply&p=2877600)






http://www.thirdgen.org/techboard/images/buttons/post_old.gif 05-08-2006, 12:55 PM

#6 (http://www.thirdgen.org/techboard/posts/diy-prom/362848-32b-6e-works-great/2877605-post6.html)



PonyKiller87 (http://www.thirdgen.org/techboard/member.php?u=14130)
Senior Member

Join Date: Apr 2002
Location: Milwaukee, Wisconsin
Posts: 537
Car: 87 Iroc Z28
Engine: 355 TPI
Transmission: T56

Classifieds Rating: ()

http://www.thirdgen.org/images/tgo10.gif
http://www.thirdgen.org/techboard/images/misc/im_aim.gif (http://www.thirdgen.org/techboard/diy-prom/362848-32b-6e-works-great.html#) http://www.thirdgen.org/techboard/images/misc/im_yahoo.gif (http://www.thirdgen.org/techboard/diy-prom/362848-32b-6e-works-great.html#)



Quote:


Originally Posted by jwscab
I don't beleive there is anything in the memcal that would prevent the datalogging from happening(other than the code). The aldl operation will follow the mask, so you should use the 6E if the code was changed to 6E.




Thats what I was hoping for because the ADS file for the 6E is way better. I think when I did get it to connect I was running the 32B so maybe thats why I didn't get anything.


http://www.thirdgen.org/techboard/images/buttons/user_offline.gif http://www.thirdgen.org/techboard/images/buttons/garage.gif (http://www.thirdgen.org/techboard/vbgarage.php?do=view&id=14130)

http://www.thirdgen.org/techboard/images/buttons/quote.gif (http://www.thirdgen.org/techboard/newreply.php?do=newreply&p=2877605)






http://www.thirdgen.org/techboard/images/buttons/post_old.gif 05-08-2006, 04:33 PM

#7 (http://www.thirdgen.org/techboard/posts/diy-prom/362848-32b-6e-works-great/2877936-post7.html)



Mangus (http://www.thirdgen.org/techboard/member.php?u=2297)
TGO Supporter

http://www.thirdgen.org/techboard/customavatars/avatar2297_2.gif (http://www.thirdgen.org/techboard/member.php?u=2297)

Join Date: Jan 2000
Location: In your ear. No, the other one.
Posts: 1,857
Car: '89 Trans Am WS6
Engine: 350 TPI
Transmission: T5WC
Axle/Gears: 3.08 posi

Classifieds Rating: ()

http://www.thirdgen.org/images/tgo10.gif



When running $6E, use the 1227165_6E.ads file included with TunerPro. If it doesn't connect the first try and you're sure your ALDL settings are correct, then hit connect again.

M



http://www.thirdgen.org/techboard/images/buttons/user_offline.gif http://www.thirdgen.org/techboard/images/buttons/garage.gif (http://www.thirdgen.org/techboard/vbgarage.php?do=view&id=2297)

http://www.thirdgen.org/techboard/images/buttons/quote.gif (http://www.thirdgen.org/techboard/newreply.php?do=newreply&p=2877936)






http://www.thirdgen.org/techboard/images/buttons/post_old.gif 05-08-2006, 04:43 PM

#8 (http://www.thirdgen.org/techboard/posts/diy-prom/362848-32b-6e-works-great/2877955-post8.html)



87 Vette Owner (http://www.thirdgen.org/techboard/member.php?u=45014)
Member

http://www.thirdgen.org/techboard/customavatars/avatar45014_1.gif (http://www.thirdgen.org/techboard/member.php?u=45014)

Join Date: Feb 2006
Location: Monroe, NY
Posts: 180
Car: 1987 Corvette
Engine: 383 ci
Transmission: ZF 6 Speed
Axle/Gears: 4.10 Dana 44

Classifieds Rating: ()




Quote:


Originally Posted by Mangus
When running $6E, use the 1227165_6E.ads file included with TunerPro. If it doesn't connect the first try and you're sure your ALDL settings are correct, then hit connect again.

M




http://www.thirdgen.org/techboard/images/smilies/thanks.gif Thanks Mark!

Dan


http://www.thirdgen.org/techboard/images/buttons/user_offline.gif http://www.thirdgen.org/techboard/images/buttons/garage.gif (http://www.thirdgen.org/techboard/vbgarage.php?do=view&id=45014)

http://www.thirdgen.org/techboard/images/buttons/quote.gif (http://www.thirdgen.org/techboard/newreply.php?do=newreply&p=2877955)





http://www.thirdgen.org/techboard/images/buttons/post_old.gif 05-08-2006, 04:43 PM



ThirdGen
1992 Camaro

http://static.ibsrv.net/ads/css/thirdgen/92camaro.jpg


Paid Advertisement




http://secure-us.imrworldwide.com/cgi-bin/m?ci=ade2013-ca&at=view&rt=banner&st=image&ca=collectiveglade&cr=36355040_108974000_34057639760&pc=36088520&ce=Overall&rnd=1606863336http://c.betrad.com/a/4.gif <a href="http://a.collective-media.net/jump/cm.internet_brands_autocommunity/flook_kv;sz=300x250;ord=1896500002?" target="_blank"><img src="http://a.collective-media.net/ad/cm.internet_brands_autocommunity/flook_kv;sz=300x250;ord=1896500002?" width="300" height="250" border="0" alt=""></a> <a href="http://ad.doubleclick.net/adj/thirdgen.tmus/category;kw=bottom;category=Tech_Boards__DIY_PROM; topic=32B%206E%20works%20great%20but%20no%20Datalo gging;sz=300x250;ord=123456789?" target="_blank" ><img src="http://ad.doubleclick.net/adj/thirdgen.tmus/category;kw=bottom;category=Tech_Boards__DIY_PROM; topic=32B%206E%20works%20great%20but%20no%20Datalo gging;sz=300x250;ord=123456789?" border="0" alt="" /></a>

<a href="http://ad.doubleclick.net/adj/thirdgen.tmus/category;kw=bottom;category=Tech_Boards__DIY_PROM; topic=32B%206E%20works%20great%20but%20no%20Datalo gging;sz=500x250;ord=123456789?" target="_blank" ><img src="http://ad.doubleclick.net/adj/thirdgen.tmus/category;kw=bottom;category=Tech_Boards__DIY_PROM; topic=32B%206E%20works%20great%20but%20no%20Datalo gging;sz=500x250;ord=123456789?" border="0" alt="" /></a>














http://cdnx.tribalfusion.com/media/common//adChoice/icon/ad_choices_i_UR.pnghttp://cdnx.tribalfusion.com/media/common//adChoice/icon/ad_choices_UR.png (http://a.tribalfusion.com/j.u?rnd=1112857422&redirect=http://www.aboutads.info/choices/)


<a href="http://ad.doubleclick.net/jump/thirdgen.tmus/category;kw=bottom;category=Tech_Boards__DIY_PROM; topic=32B%206E%20works%20great%20but%20no%20Datalo gging;sz=728x90;ord=123456789?" target="_blank" ><img src="http://ad.doubleclick.net/ad/thirdgen.tmus/category;kw=bottom;category=Tech_Boards__DIY_PROM; topic=32B%206E%20works%20great%20but%20no%20Datalo gging;sz=728x90;ord=123456789?" border="0" alt="" /></a>



http://www.thirdgen.org/techboard/images/buttons/reply.gif (http://www.thirdgen.org/techboard/newreply.php?do=newreply&noquote=1&p=2877955)









http://www.thirdgen.org/techboard/images/misc/navbits_start.gif (http://www.thirdgen.org/techboard/diy-prom/362848-32b-6e-works-great.html#)


Third Generation F-Body Message Boards (http://www.thirdgen.org/techboard/) > Tech Boards (http://www.thirdgen.org/techboard/tech-boards/) > DIY PROM (http://www.thirdgen.org/techboard/diy-prom/)



http://www.thirdgen.org/techboard/images/misc/navbits_finallink.gif (http://www.thirdgen.org/techboard/diy-prom/362848-32b-6e-works-great.html) 32B to 6E works great but no Datalogging?




« Progress report, made some progress with rich O/L! (http://www.thirdgen.org/techboard/diy-prom/362909-progress-report-made-some.html) | 1227302 ecu file (http://www.thirdgen.org/techboard/diy-prom/362776-1227302-ecu-file.html) »






Tags (http://www.thirdgen.org/techboard/tags/)



165 (http://www.thirdgen.org/techboard/tags/165.html), 32b (http://www.thirdgen.org/techboard/tags/32b.html), 6e (http://www.thirdgen.org/techboard/tags/6e.html), data (http://www.thirdgen.org/techboard/tags/data.html), ecm (http://www.thirdgen.org/techboard/tags/ecm.html), logging (http://www.thirdgen.org/techboard/tags/logging.html) http://www.thirdgen.org/techboard/images/misc/11x11progress.gif






Thread Tools



http://www.thirdgen.org/techboard/images/buttons/printer.gif Show Printable Version (http://www.thirdgen.org/techboard/print/diy-prom/362848-32b-6e-works-great-print.html)



http://www.thirdgen.org/techboard/images/buttons/sendtofriend.gif Email this Page (http://www.thirdgen.org/techboard/sendmessage.php?do=sendtofriend&t=362848)






Search this Thread






Advanced Search (http://www.thirdgen.org/techboard/search.php?searchthreadid=362848)









http://www.thirdgen.org/techboard/images/buttons/collapse_thead.gif (http://www.thirdgen.org/techboard/diy-prom/362848-32b-6e-works-great.html#top) Posting Rules




You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
BB code (http://www.thirdgen.org/techboard/misc.php?do=bbcode) is On
Smilies (http://www.thirdgen.org/techboard/misc.php?do=showsmilies) are On
[IMG] (http://www.thirdgen.org/techboard/misc.php?do=bbcode#imgcode) code is On
HTML code is Off
Trackbacks (http://www.thirdgen.org/techboard/misc.php?do=linkbacks#trackbacks) are Off
Pingbacks (http://www.thirdgen.org/techboard/misc.php?do=linkbacks#pingbacks) are Off
Refbacks (http://www.thirdgen.org/techboard/misc.php?do=linkbacks#refbacks) are Off

















http://www.thirdgen.org/techboard/clear.gif http://pagead2.googlesyndication.com/simgad/12713482069150497841 (http://googleads.g.doubleclick.net/aclk?sa=L&ai=CZbLYgS5aUtCLIo72kwT2-YCwBszvq6IGAAAQASAAULmThdj4_____wFgyZ7QhsijhBmCARd jYS1wdWItMDI5NjY2MDQ3ODg3MDc5McgBAuACAKgDAaoEqQFP0 L_T0ou_11Kc3K17uqLD_OZ4ogambSAbaWLmKD6-Jy0DlQE7iv9lnFmUR4YmYDHAnV9y83Rxp0mZaA6p-pvgoHAHrg1UjtZkYBogoQPrxM68Bbn7wkexMw_UJO4P26xbjmt oZp_xx6Z9HwXtDpX29L6JQ7CNuY3ganbhvE58zaSTx2nqn6Ni3 lwETU5BGzO-5Uv99XJtRF60U3tOv8I3XEM40gP-_PGd4AQBoAYU&num=0&sig=AOD64_23mZSrbGlZBIf1P0EP6pu4yLalxw&client=ca-pub-0296660478870791&adurl=http://www.nissanofbakersfield.com/get-financed-here/) <a href="http://ad.doubleclick.net/jump/thirdgen.tmus/category;category=Tech_Boards__DIY_PROM;topic=32B% 206E%20works%20great%20but%20no%20Datalogging;sz=1 60x600;ord=123456789?" target="_blank" ><img src="http://ad.doubleclick.net/ad/thirdgen.tmus/category;category=Tech_Boards__DIY_PROM;topic=32B% 206E%20works%20great%20but%20no%20Datalogging;sz=1 60x600;ord=123456789?" border="0" alt="" /></a>


http://pagead2.googlesyndication.com/pagead/imgad?id=CICAgICQ7e3SWBABGAEyCHa0AIUj0WLi
http://pagead2.googlesyndication.com/pagead/imgad?id=CICAgICQpev-zAEQARgBMgixelKU-7tB4Q
http://pagead2.googlesyndication.com/pagead/imgad?id=CICAgIDQkaD-7wEQARgBMgg6HIzbM6SWDw
http://pagead2.googlesyndication.com/pagead/imgad?id=CICAgICQ7e3CjQEQARgBMghKPrBWDaPpRA
http://pagead2.googlesyndication.com/pagead/imgad?id=CICAgICQpev5bBABGAEyCEdljMb4ju-C
http://pagead2.googlesyndication.com/pagead/imgad?id=CICAgICQpevm6gEQARgBMgjItuWXgCHDsg (http://adclick.g.doubleclick.net/aclk%253Fsa%253DL%2526ai%253DB7xYugS5aUpmsKIzMkwSp i4HwAvyY29MEAAAAEAEgADgAWITsw_9aYMme0IbIo4QZggEXY2 EtcHViLTAyOTY2NjA0Nzg4NzA3OTGyARB3d3cudGhpcmRnZW4u b3JnugEJZ2ZwX2ltYWdlyAEJ2gFJaHR0cDovL3d3dy50aGlyZG dlbi5vcmcvdGVjaGJvYXJkL2RpeS1wcm9tLzM2Mjg0OC0zMmIt NmUtd29ya3MtZ3JlYXQuaHRtbMACAuACAOoCGzI5MjIvdGhpcm RnZW4udG11cy9jYXRlZ29yefgCgdIekAOsApgD4AOoAwHQBJBO 4AQBoAYg%2526num%253D0%2526sig%253DAOD64_3k6LKHfud 978hqfeGRF17QJYFh8A%2526client%253Dca-pub-0296660478870791%2526adurl%253Dhttp://www.racingjunk.com/?aid=32792)

istter1
10-13-2013, 11:39 PM
Finally got it to load. Will put my new chip I later today and record what happens.
Thanks for the help.
Lots for me to learn here.
STEVE
:jfj:

istter1
10-13-2013, 11:43 PM
istter1
Finally got it to load. Will put my new chip I later today and record what happens.
Thanks for the help.
Lots for me to learn here.
STEVE:jfj:

istter1
10-14-2013, 07:37 AM
I know what a chip can do. I installed my chip from PCM of NC. Oh my god My new 383 stroker is a monster now. I have a before I installed log and when I have time I will compare thanks to all the help from people at this forum

Thanks
Steve
Lots more to lern