View Full Version : New 24x reluctor kit for CNP ignition and 512kb PCM for $199

09-02-2013, 08:20 PM
I just wanted to let you guys know that EFIConnection now offers a new redesigned 24x reluctor for the 1996-2002 vans/1996-99 trucks and the 1996-2000 SUV's that are equipped with the Vortec 305/350 L30/L31.

For $199 you get a redesigned 24x reluctor, a cap for the distributer body as the distributer is used for the 1x camshaft position signal, a crankshaft position sensor and a new plastic front timing cover that holds the CKP sensor.
Then you can use Tunercat/EFIlive to recalibrate a 512kb dual 80 pin connector PCM along with an LS1 F-body(Camaro/Firebird) calibration for cable throttle( or DBC-Drive By Cable), or an LS1 Corvette calibration for Electronic Throttle COntrol(ETC or DBW=Drive By Wire).

With this kit the GEN 3, 8 coil near plug (CNP) setup can be used on a Vortec truck. This kit, a 512 kb PCM and CNP ignition. A nice step up from a single coil ignition, blackbox PCM setup.

That pricing is crazy good, for sure jump on this deal. I just ordered mine.

Here is the package.
http://i1202.photobucket.com/albums/bb373/Paul_Schermerhorn/24x_SBC_Vortec_Conversion_Kit.png (http://s1202.photobucket.com/user/Paul_Schermerhorn/media/24x_SBC_Vortec_Conversion_Kit.png.html)