copypng tables

[ony]

hi, how can I copy a spark table from $0d to $ 42 bin with out doing it 1 cell at a time?

[EagleMark]

You can't. The tables are different.

[dave w]

hi, how can I copy a spark table from $0d to $ 42 bin with out doing it 1 cell at a time?

Microsoft Excel is how I've done it. Copy~paste / sort to match RPM vs. Kpa / copy~paste.

I consider my skill level with Excel as "Very Experienced".

dave w

[ony]

I will fumble around with the excel and see what I can do, iwas wondering the engine in my truck came out of one that was$0d, they run a little more agresive timming and things, [ just playing kindof bored]:laugh:

[ony]

I forgot to ask , after you 0 out v2 table and you get v1 where you want it, should you put v2 back to the original setting and subtract it from v1? I am starting not to remember I guess.

[EagleMark]

Actually that is good thinking ony! :thumbsup:

When you open TunerPro you can open a second TunerPRo to have both $42 and $0D bins open the same time and copy from one to another, but not entire table because they are different sizes.

Tunerpro, Tools, Custom Tools, New TunerPro Instance. Poof! 2 of them!

[EagleMark]

I forgot to ask , after you 0 out v2 table and you get v1 where you want it, should you put v2 back to the original setting and subtract it from v1? I am starting not to remember I guess.You can, I do. Does not have to be factory setting, I usually use 25. Can scale that back a little if need be for 400, 800 etc... rows. So...

10
15
20
25
25
25
25
25

[ony]

thanks for the replys, I am still pitling with my sync bin,it seams to run more timming without knock counts. is any one here running dish internet, we have hughs net it only seams to work right on Friday, thinking of changing net providers!!!

[Nasty-Z]

When you open TunerPro you can open a second TunerPRo to have both $42 and $0D bins open the same time and copy from one to another

Tunerpro, Tools, Custom Tools, New TunerPro Instance. Poof! 2 of them!

And if you run multiple screens on the PC it makes the whole process very simple

TOM