View Full Version : Doesn't matter what I try, random knock counts upon communication connection.
damanx
05-09-2013, 12:19 AM
I've tried everything. It's gotten to a point where I'm going to ignore the knock counts.
Only problem is that I am not sure that the knock counts that show up are random or stored in the ecm.
In any case, the counts don't increase as I am driving.
RobertISaar
05-09-2013, 12:37 AM
is this before or after cranking the engine?
damanx
05-09-2013, 12:48 AM
It occurs before start up, after start up, before warm up, after warm up, it really doesn't seem to matter when I connect and start tuner, it occurs.
EagleMark
05-09-2013, 01:53 AM
It's an accumulator, there will always be knock counts. The only way to find knock in this ECM is to watch data and see knock counts increase.
Your still running the bin I gave you? It has the forced knock ESC test done, so it will not force knock at WOT PE as a test either.
damanx
05-09-2013, 02:09 AM
Yes, still running that bin.
EagleMark
05-09-2013, 02:21 AM
In all your logs I've seen I've never seen knock occur. As I said it will always have a number, don't worry about it unless the number is moving/increasing!
damanx
05-09-2013, 02:24 AM
Thanks Mark!
Just did not want to worry about adjusting something that was not an issue.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.