2003 TunerPro Bin Files

[EagleMark]

2003 TunerPro Bin Files

[RobertISaar]

2003

[RobertISaar]

more.

[T-Rex]

http://www.gearhead-efi.com/Fuel-Injection/images/attach/bin.gif '03 Chevy 4x2 6.0L os12579405.bin (1.00 MB)

http://www.gearhead-efi.com/Fuel-Injection/images/attach/bin.gif 03 Chevy 1500 4x2 6.0 LQ4 12579405.bin (1.00 MB)

http://www.gearhead-efi.com/Fuel-Injection/images/attach/bin.gif '03 Chevy 1500 4x4 LM7 os12579405.bin (1.00 MB)

http://www.gearhead-efi.com/Fuel-Injection/images/attach/bin.gif 03 Chevy 2500 4x2 6.0 LQ4 os12579405.bin (1.00 MB)

http://www.gearhead-efi.com/Fuel-Injection/images/attach/bin.gif '03 Chevy Half 4x2 6.0 LQ4 os12579405.bin (1.00 MB)

[T-Rex]

http://www.gearhead-efi.com/Fuel-Injection/images/attach/bin.gif '03 Chevy Half T 4x4 6.0L os12593058.bin (1.00 MB)

http://www.gearhead-efi.com/Fuel-Injection/images/attach/bin.gif '03 Chevy MPV Half T 4x2 4.8 LR4 os12579405.bin (1.00 MB)

http://www.gearhead-efi.com/Fuel-Injection/images/attach/bin.gif '03 K1500 6.0L os12579405.bin (1.00 MB)

http://www.gearhead-efi.com/Fuel-Injection/images/attach/bin.gif '03 K1500 6.0L os12593058.bin (1.00 MB)

[dave w]

2003 Express Van 1 Ton 6.0L 4L80E Drive by Cable OS 12579405

[RobertISaar]

....

[Playtoy_18]

....

[BOB_144]

13482

[Peter_Tremonti]

2003 Suburban LT 1500 5.3L Flex Fuel RWD Automatic Stock
SERV. NO 12582605
HDW NO. 12580786
OS 12579405

[1project2many]

Thank you.

[Peter_Tremonti]

Thank you.

I have another PCM I picked up from the junkyard but didn't pay attention to what year suburban/yukon it was taken out of.

If you want to put this in the right place, I can upload it for you.

HDW NO 12589162
SERV NO 12589463

[N2OInsane]

Does anyone have an XDF file for the 12579405?

[LRT]

....

[N2OInsane]

See the thread linked below:

http://www.gearhead-efi.com/Fuel-Injection/showthread.php?1335-TunerPro-XDF-for-0411-LS1-PCM-Project!/page2

Specifically post #25 through #28.

So if reading correctly, its best to jam a 04 OS on the ecu that matches what i drive and then tune or make changes from there. Guess i am lucky i got an 04 ecu from the junkyard for my test ecu. Will plug up to my truck to see if removing the vats and minor tweaks worked. Thanks for the help, came across that thread before but guess i didnt really really read it.

[LRT]

....

[Jcac]

Hi everyone. Newbie. Justed wanted to know if anyone have a bin file for a ecm that I picked up at the junkyard for me to learn how to remove vats. I also have another ecm for the 5.3l engine and tranny I picked up at the junkyard. But first I want to use one of them to learn how to use. It's from a 03 Tahoe 2wd 5.3l with a 6L60e tranny. The number on the pcm is 12582607.
If any one has a bin please help me out. I appreciate it.


Joey

[B52Bombardier1]

A 6L60E transmission in a 2003 Tahoe? Are you sure on that? Maybe a 4L60E transmission? That trans would have been typical for a 2003 Tahoe and as far as I can tell, GM never made a 6L60E. The 6L80E came out in 2006 and it could have been possibly retrofitted to a 2003 Tahoe with a 5.3 liter but you won't find a stock 2003 6L80E BIN mated to a 2003 engine. That combo did not exist in 2003.

If it is a 4L60E that you have, there are several combos with richly detailed XDF files around here for 5.3L engines and 4L60E transmissions. Basically, you would completely overwrite (after making a copy) your 12582607 BIN and replace it with one of these:

12208322

12212156

12202088


Rick

[Jcac]

Hi there Rick. Nice to meet you. Thank you for hour info and hour right about that tranny. I just happen To make a mistake in tying that tranny. The right tranny was a 4L60E. I’m using this Ginny pig pcm so I could learn how to remove vats. I also have another pcm that came from a 03 Tahoe 5.3l 2wd with a 4L60E tranny. I bough this so I could put it in on a 1951 GMC 100 pickup. So I’m try to learn how to remove the vats so I could get it started.


Thank you have a good day.
Joey from Cali

[Johnwayne1]

About the 03 with the return. If i use a 04 os on my 03 engine would i just compare injector flow rate and copy whats on the 03 tune onto the 04 bin through tunerpro? If that makes sence

[G30_Hightop]

I'm looking for the same.

[G30_Hightop]

Does anyone have an XDF file for the 12579405?

I'm looking for the same XDF file.

[Neukam]

2003 Workhorse P42 Chassis L31 5.7L 4L80E Flashed into a 12200411 with TIS2000 and then read with PCM Hammer
OS 12212156
Stock Unmodified

[rickky bobby]

2003 chevy express 2500 van 5.3-4L60E updated. (thanks to kur4o)

[yoheer]

03 Hummer (2 cars)

[Jamealogan552]

I need a matching xdf file for my 03 5.3 dbc 12579405 is my bin i need xdf for that bin or a new bin and matching xdf to write to my 03 pcm to make it run with no vats .

[Bigbrd]

any 2003 Deville bin files? anyone upgrade to an 0411 computer for caddys?

[rickky bobby]

03 Silverado 1500 with 3.73 gears and 26 gallon fuel tank. 5.3L 4L60E. edit: cant find bin to reupload. tis pdf has calibration info if someone has access to tis web.

[FrankenChevy00]

hey just so you know, in this bin file (12579405) you have downshift from 3>2 set above max speed meaning it could manually downshift from 3>2 at any speed. thatll trash a stock 4l60 considering max speed is 26mph higher than stock. correct me if im wrong but i think it should be noted.

[Nick79squarebody]

Pulled this bin today off of a random loose pcm laying around. I believe it to be from a 2003 6.0/80e van

[woody80z28]

2003 4.3/nv3500/4x4/3.42 Blazer 9405 OS

[jonjon]

Will this work with a 03 Escalade

[kastein]

Anyone happen to have a 2003 2500/3500 or higher class pickup or SUV bin for 8.1 and dual tanks? It should be OS 12579405 (most likely) or 12593058 (unlikely but would make my life much easier) with fuel segment 12577990. Nothing else matters as far as I'm concerned, I don't even really care if it's an 8.1 it's just that that seems to be the only vehicle I have found this dual tank fuel segment on. I have two examples in HPT format but I need it in BIN format and I do not trust any of the websites I've seen claiming to sell an HPT to BIN converter app.

[NEokcTERROR]

I had looked through over 50 2003 6.0 truck files I have in my library and I did not have the Segment 7 (System) in any of them. That got me thinking someone may have over written the values in it at some other time. So I just had to recreate it with SPS and read it out. Here it is if anyone needs it.

Segment List for vin 1GCGK29U43Z111239 2003 2500 Chevy 60L 4L80E
1. 12593058
2. 12591788
3. 12592321
4. 12592379
5. 12572475
6. 12578354
7. 12572592
8. 12572521