whstark
01-06-2013, 10:50 PM
HI , I'm an Tech Here at a local Electronics repair sales place, been into electronics and computers for all my years, 63 now, I'm also a DAV on pain meds for my back so cant do to too much on the car. I just got a 91 camaro RS as my sole transportation from someone here at work. I put on a broken Digatal Exaust valve, but then it turned serious and stared intermittent dead while in motion. I had no Idea and was stuck so I called a local shop to tow and fix. What a expensive mistake. they took me for alot and put in a distributor and then a ECM, and would not take back ECM even though it did not fix it the second time they tryed. The third time they had to re-replace the distributor sensor again as fix they said. Even made me pay 10 for the ECM core I wanted because its still ok and charged me 450 for. I Even went back 1 week after fix for Idle problem and Wanted another diagnostic fee after refusing called later to tell me 450 for a radiator temp and a idle air actuator, I must be in the wrong business seems like 200 an hour to me. Even had to fight t get my car back. So much for my gripes I had to tell someone.
So I'm looking around for the 1227730 ECM 6811 commented sources I heard I might find on the net. I got the old ECM to make a simulator, but still need another prom to play with , Thought Id make a scanner also with the AVR micro as mentioned on the net I have all the parts from a previous project not made (LCD display and a Atmega324p). Maybe have a digatal Dash as the out come.(Dreamer).
So I'm a Lookin,
Mr Bill
So I'm looking around for the 1227730 ECM 6811 commented sources I heard I might find on the net. I got the old ECM to make a simulator, but still need another prom to play with , Thought Id make a scanner also with the AVR micro as mentioned on the net I have all the parts from a previous project not made (LCD display and a Atmega324p). Maybe have a digatal Dash as the out come.(Dreamer).
So I'm a Lookin,
Mr Bill