OBDII Data ADX for TunerPro

[EagleMark]

ELM ADX files for TunerPro.

[highlander]

Is there any ADX file that will gather data (scan) from RoadRunner?

[woody80z28]

Will this ADX work with a cable such as this one?

https://www.ebay.com/itm/324021140773

[KC5UEA]

Will this ADX work with a cable such as this one?

https://www.ebay.com/itm/324021140773

Hi all,

Yes, that is what it is for. If you haven't already bought the cable, buy a Bluetooth unit and use Torque Pro to log the PCM.
Or get Ls Droid or PCMHammer and an OBDLink LX!

Mike

[woody80z28]

I have an obdlink lx and have used torque, but I'm in search of a faster sample rate. I know the sample rate on the bluetooth elm adapters are slow, is the cable version no better?

[woody80z28]

Update: bought an ELM327 cable and it wouldn't even connect to TunerPro. The driver gave an error that it was phased out in 2012 or something. I did notice in the install instructions that the baud was 38? So I doubt it would have been really fast anyway...

This was the one...I'd stay away from it:
https://www.amazon.com/dp/B081S15H7R

[GeoNV]

thanks for posting this! I was able to use it with a OBDlink LX on my 2004 GMC Sierra with a P59.

[RGROSE954]

what adx are you using with the sierr p59??

[???]

Update: bought an ELM327 cable and it wouldn't even connect to TunerPro. The driver gave an error that it was phased out in 2012 or something. I did notice in the install instructions that the baud was 38? So I doubt it would have been really fast anyway...

This was the one...I'd stay away from it:
https://www.amazon.com/dp/B081S15H7R

that's a shame, I was playing around with it, since I already had a Bluetooth one. tp connects to it when I use the wrong adx, just no useful data of course. but when I the to use the adx for obd2 off tunerpro site, I get this error and it won't load.

shame, cause like torque pro, adding user defined pid would have been interesting.

has anyone had any luck with this?