Stevewarden0
04-18-2024, 02:01 AM
I am new to this!
its not as easy as it looks...
I have a 1971 Buick Riviera Boattail with a somewhat fubared engine, so I picked up an LM7 I also got a VX pro.
Downloaded LSDroid and Tuner Pro, made the wiring for the Blue connector - switches etc..
All works well got LSDriod comms and info, downloaded the BIN file and saved.
Copied the *.dll to the Tuner Pro location
Then opened TunerPro then the appropriate XDF file (matching OS version)
Opened Bin file
My first attempt was to just change VATS to #2 - when I try to save I get a checksum error.
Everything I read says I have to put the correct *.dll files in the Tuner Pro folder and they MUST match, I got the DLLs from the LS Droid folder
so I am a little lost.
What am I doing wrong?
ALSO...
is there a place on the interweb where I can find BIN files with search fields? i.e. Manual trans (its a TH350 so I presume same info) VATs off , just front O2 etc...
I plan to learn as much as I can - but lots of reading to do!
Hello and Thanks
Steve
its not as easy as it looks...
I have a 1971 Buick Riviera Boattail with a somewhat fubared engine, so I picked up an LM7 I also got a VX pro.
Downloaded LSDroid and Tuner Pro, made the wiring for the Blue connector - switches etc..
All works well got LSDriod comms and info, downloaded the BIN file and saved.
Copied the *.dll to the Tuner Pro location
Then opened TunerPro then the appropriate XDF file (matching OS version)
Opened Bin file
My first attempt was to just change VATS to #2 - when I try to save I get a checksum error.
Everything I read says I have to put the correct *.dll files in the Tuner Pro folder and they MUST match, I got the DLLs from the LS Droid folder
so I am a little lost.
What am I doing wrong?
ALSO...
is there a place on the interweb where I can find BIN files with search fields? i.e. Manual trans (its a TH350 so I presume same info) VATs off , just front O2 etc...
I plan to learn as much as I can - but lots of reading to do!
Hello and Thanks
Steve