PDA

View Full Version : GM AcDelco E38 ECU Seed/Key finder (testing needed!)



Datura
12-11-2023, 12:16 AM
Hello!

I wrote tool to brutforce key for reading/flashing E38 ECU. (with non standart key)
Tool have power control to reboot ecu correctly.

May be somebody have this ECU, need to test tool.

https://github.com/kompumaster/E38-KEYFCKR

PS. Somebody have registration on pcmhacking.net, want to publish there, but registration not activated for a long time...

In-Tech
12-11-2023, 01:40 AM
Hiya,
Interesting how I cannot read the source file. I can already beat up ANY e38, your files are suspect, hate to say if you are actually contributing.

Datura
12-11-2023, 02:31 AM
How can they be suspicious if the full source code is posted on github?

All you need to run is python 3.12 x32, a j2534 device (I use scanmatik), and a single transistor device for power management.

Datura
12-11-2023, 09:52 PM
First success! =)

19599

Datura
12-11-2023, 09:54 PM
Guys!

May be somebody know tool/way to write original Key to ECU?
Or just rewrite changed eeprom area (0xC000 - 0xFFFF), with changed key.

Datura
12-11-2023, 11:53 PM
...or may be just CAN command?
for ex. - change VIN
\__ 00 00 07 e0 3b 90 VV VV VV VV VV VV VV VV VV VV VV VV VV VV VV VV VV

kur4o
12-12-2023, 01:49 AM
Vin can be changed but seed/key is not possible with current tools. You need a program that will rewrite the eeprom section.

I am not sure you really need power cycle the pcm.

The sequence is request seed->test key1, test key2 ->wait 10 seconds->request seed->test key3,test key4->and so on.

You can monitor the responses of pcm, usually there is 34 for success and some other 35,37 for different conditions not met.

Datura
12-12-2023, 02:05 AM
Ok, i try this idea ��

Till now - i have ecu with unknown key, so test it with most strong method..