Hotrodhawk
11-26-2023, 06:23 PM
Something has happened that's keeping my target rpm setting to just displaying the "in gear target". In park and neutral the "idle target" never switches to what is set at. R
I'm assuming its the pressure range switch in the trans is the culprit. Range A for Netural and Range C for Park show no change in those respective bits when selected.
The Park Netural safety switch at the shifter is functioning proper.
Any thoughts?
I'm assuming its the pressure range switch in the trans is the culprit. Range A for Netural and Range C for Park show no change in those respective bits when selected.
The Park Netural safety switch at the shifter is functioning proper.
Any thoughts?