Jefferson
07-18-2023, 05:37 AM
I have a 1993 p30 that I pull my stock car enclosed trailer with.
I installed a brand new, full roller gen 6 454 crate engine.
I have a SPR 54mm bored throttle body with the 18psi spring kit on a dual plane Edelbrock intake.
I currently have a Harris chip.
I do have the ability to datalog. (ALDL Droid) wonderful product!
I do not have the equipment to tune or burn a chip
I am looking for someone to use my data to correct the tune I have.
Here's my problem.
My cold idle speed is very high and RICH RICH RICH! My closed loop blm is always 88-98.
I have went through EVERYTHING that would cause these issues outside of the tune. This thing mechanically is perfect. I do believe these issues are my current tune. I have backed fuel pressure down to 13psi just so I can use it to go racing. Its manageable right now but I need to do something fairly quick and Harris doesn't seem to be willing to correct this tune.
7060 computer
BAJW chip with the adapter to the new Harris chip.
Thanks for reading.
I installed a brand new, full roller gen 6 454 crate engine.
I have a SPR 54mm bored throttle body with the 18psi spring kit on a dual plane Edelbrock intake.
I currently have a Harris chip.
I do have the ability to datalog. (ALDL Droid) wonderful product!
I do not have the equipment to tune or burn a chip
I am looking for someone to use my data to correct the tune I have.
Here's my problem.
My cold idle speed is very high and RICH RICH RICH! My closed loop blm is always 88-98.
I have went through EVERYTHING that would cause these issues outside of the tune. This thing mechanically is perfect. I do believe these issues are my current tune. I have backed fuel pressure down to 13psi just so I can use it to go racing. Its manageable right now but I need to do something fairly quick and Harris doesn't seem to be willing to correct this tune.
7060 computer
BAJW chip with the adapter to the new Harris chip.
Thanks for reading.