New Guy

[rosert]

Hi All, I recently retired and picked up a 94 K1500, 5.7, 4l60e to tinker with. Had a 88 C1500 I drove for 23 years with 327K miles on it when I got rid of it. My aunt worked for GM. Got to fly up to Michigan pick it up, and go through the plant where it was built, then drove it home. Should have kept it!

Found this site looking for info to get my OBD Diagnostics ALDL connector working. Haven't got it figured out yet, but working on pulling files together to get WinALDL or TunerPro RT working. My ECM is a 16196395 BJLF.

Looks like a fantastic site!

Thanks!

[dave w]

:welcome:
WinALDL will not work with the 16196395.

TunerPro RT files for the 16196395 are located here: http://www.gearhead-efi.com/Fuel-Injection/showthread.php?337-16196395-PCM-Information-OE

[rosert]

Thank you very much! That helps!

[ralmo94]

It should be noted that while the 6395 page showed $0E, some did come from the factory with $0D, as did my 94. Op stated he has a 4l60, so he should be looking at $0d not $0E

http://www.gearhead-efi.com/Fuel-Injection/showthread.php?303-16197427-PCM-Information-0D

Here is the link to $0d, where you will find the stock bin for the bcc code BJLF along with the $0d definition files, adx and xdf

[rosert]

I will give that a try. Thank you!