PDA

View Full Version : Another fng!


Joelker
03-12-2023, 05:29 AM
Hello,
Finally decided to do something with all these parts I have laying around. So far I have made a bench harness and it actually worked with my OBDXPro and Pcm Hammer.
Currently trying to find a XDF file with will work with my os (12597120) but looking like i will need to swap the OS as its not common it seems. its a 06 3500 van with a 4.8 and a 4l80e. Fortunately im not breaking any new ground with this combo!
Thanks for the add!
ralmo94
03-12-2023, 06:15 PM
Welcome.
You could give universal patcher a try, it does not require an XDF, and it will create one for you also.
Joelker
03-14-2023, 01:33 AM
Trying it, but no luck yet. I have another one i can try.
ralmo94
03-14-2023, 01:50 AM
Trying it, but no luck yet. I have another one i can try.

Did universal patcher not find tables, or what happened?
Joelker
03-14-2023, 04:26 AM
Did universal patcher not find tables, or what happened?
Yeah, it was saying that it couldnt find the DTC table. Rebooted everything and it worked then! WooHoo!
Thanks!!