REO Truck project

[spencer4095]

I appreciate the opportunity to have access to this valuable resource. The project was started in December of 2022. I've had the truck for 30+ years. Now have a 2001 2500HD 6.0 chassis to put it on. Now to figure out programming the PCM.
Thanks,
Mark

[Fast355]

I appreciate the opportunity to have access to this valuable resource. The project was started in December of 2022. I've had the truck for 30+ years. Now have a 2001 2500HD 6.0 chassis to put it on. Now to figure out programming the PCM.
Thanks,
Mark

OBDLinkSX cable, Universal Patcher and PCM Hammer are the most affordible means to get started.

[spencer4095]

Thanks for the suggestions. I have an OBDXPro VT and have managed to read my spare PCM with PCM Hammer. I'll have to look at Universal Patcher.
Mark

[Gulliveros]

Great to hear about your REO truck project! I'm glad you're finding this resource valuable. 30+ years is quite a long time to have the truck. I'm sure it holds a lot of memories. Good luck with programming the PCM! By the way, I also have a Maxxforce 13 engine, and I know what you mean about the EGR. I recently found a group of guys who deleted the EGR from their Maxxforce engines, and I have to say, it's made a huge difference in the engine's performance.