looking for a lm7/th400 with stage 4 cam bin

[Badinfluence_racing]

New here, thank you for the add, also new to obdii tuning as well. im looking for
0411/os 088 bin for an lm7 that will have 4wd th400 and a summit stage 4 cam. looking for a good start up and idle bin, or something close any help is appreciated. :rockon:

[dave w]

Most files available on gearhead-efi are stock files. Unfortunately, the TH400 was not a factory stock option for OS 088

Stock OS 088 .bin files here: http://www.gearhead-efi.com/Fuel-Injection/showthread.php?1512-2001-TunerPro-Bin-Files

Maybe edit out the transmission codes?

[Fast355]

Most files available on gearhead-efi are stock files. Unfortunately, the TH400 was not a factory stock option for OS 088

Stock OS 088 .bin files here: http://www.gearhead-efi.com/Fuel-Injection/showthread.php?1512-2001-TunerPro-Bin-Files

Maybe edit out the transmission codes?

Set trans option switch to non computerized auto and reflash the whole file.

[Badinfluence_racing]

thank you for the reply's. I was messing around on tuner pro last night. I didnt see exactly where you can turn the option off for trans. im about to start playing around again

[bobcratchet555]

just FYI, the th400 will also require a bump in base running air flow to idle well when you put it into gear

[Fast355]

just FYI, the th400 will also require a bump in base running air flow to idle well when you put it into gear

Mine did not, but had a P/N switch wired into the PCM and the tune files started with 4L80Es.