1990 firebird 350 aldl cable tuning

[90ws6sd]

hi everyone i recently purchased a aldl cable from moates to tune and datalog on my 90 firebird 350, i can hook up the cable and get a solid connection from the car to the computer but i can never seem to make any changes to the computer and tune the car. Am i using the wrong files for to tune it? im using the aujp_90_f-car_5_7 bin, 8d.adx, and the $8d.xdf files with tunerpro rt. i am pretty new to this and know just about nothing. help would be appreciated

[stew86MCSS396]

With a ALDL cable with your application, sorry to inform you that all you're gonna be able to see is the data. To alter the tune/PROM, you're going to need additional hardware like a chip/PROM burner i.e. Moates Burn1 (http://www.moates.net/burn2-chip-programmer-p-197.html?cPath=94) You'll also need blank PROMs (http://www.moates.net/c2-sst-27sf512-chip-p-39.html?cPath=26) that you can write the new tune to. To make the newly written PROM to work with your 1227730 ECM, I'd recommend Moates G1 adapter. (http://www.moates.net/g1-memory-adapter-tpi-etc-p-32.html) I would also consider a low profile zif to make chip swapping faster/easier. (http://www.moates.net/s4-aries-28pin-lowprofile-zif-p-46.html?cPath=26)

[90ws6sd]

thank you so much, i was stuck in a dead end for a while, now i finally know what to do, again thank you!