Great to be here

[Moofus02]

Thanks for the add. I'm doing an 0411 swap on a99 suburban with an l31 and 97k2500 will an l29 and swapping a 6.0 from an Escalade into a square body. Came here to learn

[In-Tech]

Sounds busy :welcome:

[Moofus02]

Very busy with a steep learning curve lol. I'm also remodeling a house at the same time

[Moofus02]

I'm so happy I'm not completely hopeless lol. With some study and searching I've been able to download the os from my 04 Escalade found an xdf for it and was able to get tuner pro to work. Looks like it has been messed with all torque limiters are shut off still haven't figured out my tcc issue but I'm sure that's what smoked the trans. The interior is going in my 02 8.1 suburban and the driveline in my 99 obs suburban. The 99 has a dead cylinder in center of both banks. Runs ok but has wiped out 18 cap and rotors in 160k miles. Truck has 320 k on it but is spotless. Was going to put another motor in it but bought the caddy instead for the wife so I just kept driving it with a spare cap and rotor under seat 10 min job. Then my money pit caddy let her down and I bought her a 2 year old Honda crv with 1800 miles on it. I took over the caddy. Frame on caddy is cracked from front to back control arm on drivers side so when trans died it became parts. Now that I can adjust stuff in tune a swap became possible. I'm so happy and thanks for all the work so many have put in to make this sight possible.

[ralmo94]

If you load your bin in universal patcher you can tell if it's stock or not.

[Moofus02]

If you load your bin in universal patcher you can tell if it's stock or not.

Thank you didn't know that