1tonpete
07-13-2022, 03:53 PM
Hello everyone. Been a while since I've used a forum...
I've been doing a lot of traditional hotrod stuff lately but my main driver needed an upgrade so I decided to 6.0/4l80 swap my 75 C10.
My transmission went in my 75 C10 work truck . So ... Time for upgrade.
My son and I built the engine together.
Being into 30-50s stuff I usually collect Stuff for years before building .
This time I had the lq9 sitting around and a 4l80 from a van...
Standalone harness w adapter for 4l80 .
At stage of trying to vats unlocked.
Current status....
Engine and trans are mounted and wired and mostly plumbed. Obs truck tank and sender w aftermarket pump C5 regulator etc...
Attach screen shot of how far I get... In LS droid .
P01 using tnerpro 2001 6.0 4l80bin w matching xdf.
I've tried others.
I'm sure I'm screwing up.
If I should repost someplace else please let me know.
I'll set up an image host and come back and edit or add on to the thread.
I've been doing a lot of traditional hotrod stuff lately but my main driver needed an upgrade so I decided to 6.0/4l80 swap my 75 C10.
My transmission went in my 75 C10 work truck . So ... Time for upgrade.
My son and I built the engine together.
Being into 30-50s stuff I usually collect Stuff for years before building .
This time I had the lq9 sitting around and a 4l80 from a van...
Standalone harness w adapter for 4l80 .
At stage of trying to vats unlocked.
Current status....
Engine and trans are mounted and wired and mostly plumbed. Obs truck tank and sender w aftermarket pump C5 regulator etc...
Attach screen shot of how far I get... In LS droid .
P01 using tnerpro 2001 6.0 4l80bin w matching xdf.
I've tried others.
I'm sure I'm screwing up.
If I should repost someplace else please let me know.
I'll set up an image host and come back and edit or add on to the thread.