Need a Bin and XDF file for 5.3 4l60e 4x4 BUT my OS is 9379910 So need 12212156 ??

[83trekker]

Am i correct in needing the 12212156 as i have read this is a good version to use for my OS9379910? Than clone it back to my 99 ecu.

This i will be first time using the tuner pro, I have found some Bin files on here for a 2002 5.3 4l60e 12212156 but they never say if 2x4 or 4x4 and still trying to navigate this website to find a XDF file to match?Any tips would so greatly appreciated.

Thanks

[B52Bombardier1]

2156 would be a good choice for you if editted with a 2156 XDF. If you need an already equipped 4x4 OS BIN, the 8322 BIN would also be a good choice and it also has a decently featured XDF.

For 2156 - version 4 of the XDF is on the 2nd page of the link below:

https://pcmhacking.net/forums/viewtopic.php?f=8&t=51&start=10

Rick

[83trekker]

2156 would be a good choice for you if editted with a 2156 XDF. If you need an already equipped 4x4 OS BIN, the 8322 BIN would also be a good choice and it also has a decently featured XDF.

For 2156 - version 4 of the XDF is on the 2nd page of the link below:

https://pcmhacking.net/forums/viewtopic.php?f=8&t=51&start=10

Rick

So 2156 isnt always necessary when i am going to clone a 9910 ecu and i can use the 8322 bin and XDF also, or i use a 2156 xdf and a 8322 bin am i understanding you correct? Thank you

[83trekker]

ok so i downloaded the "For 2156 - version 4 of the XDF is on the 2nd page of the link below" and found a 2002 2156 5.3 auto, and i am now playing around with it , think i am good thanks

[83trekker]

B1031 EGR SYSTEM ENABLE 1 = enabled 0 = disabled

But the window to change values just has a box SET to click it on or off, i would take it not clicking the box is disabled??
Figured it out

[JackManBark]

do you know where i can find a 8322 xdf?

[83trekker]

do you know where i can find a 8322 xdf?

There is one in here, dont know anything about it though

https://github.com/BoredTruckOwner/LS_Based_Engine_Repository/tree/master/.XDF%20Files/P01_512Kb