What am I doing wrong.

[Sledhead2]

Ok I have Tuner Pro installed, I have loaded a bin file, XDF File, and ADX File. When I did this I had parameter tree, scales tree, and Flag Tree.

Then I made a data log, now I can play the data log in Tunerpro, but I cannot play the log over the bin file to see how the stock tune looks or per say live data.

I do not see parameter tree any more and scalers and flags no load?

Also want to say I am not tuning anything, I am learning first on my stock 95 Chevy Truck, 16197247, I am using the bin, XDF and ADX files from tuner pro web site.

Tried to attached is my data log and files I am trying to use, web site will not let upload.

Can anyone link me to thread that covers this

[Sledhead2]

If anyone is will to share there email via message I can email zip file to them, to confirm its the loose nut behind the wheel.

[Sledhead2]

Got upload to work

[dave w]

Gearhead-efi information link for the 16197427 PCM, including TunerPro files: http://gearhead-efi.com/Fuel-Injection/showthread.php?303-16197427-PCM-Information-0D

YouTube Link for getting started with TunerPro RT: https://www.youtube.com/watch?v=rLRnRNapRN4 (most of the YouTube information applies to the 161974727, some information doesn't apply to the 16197427)

dave w

[Sledhead2]

Ok got Everything to work, for some reason I need to do a software update on Tunerpro.